.jpg?v=122264964)
Crawford control board for Crawford/Hafa leveler. Original
Coupling for asembling 1" shaft with 32 mm Hexagonal shaft. Incl. m8 bolts and nuts.
Length 76 mm. Gavanized steel. Original.
Length 76 mm. Gavanized steel. Original.
This cable pulley is suitable for high and vertical lifting systems on a tube with internal cables, HSK/VSK standard. For doors of max. 6000 x 6000 mm and a max. weight of 500 kg, universal left or right.
Mounting bracket for HSK / VSK to increase the distance between the vertical angle and the triangle support plate (Item KONFJVHQP3390L / KONFJVHQP3390R), to make the cable break / knife of the cable break and the orange cap pass the triangular support plate.
Triangular plate to be used for the springs on tube for our Highlift and Vertical liftsystemswith cables inside. HSK/VSK . Left version.
Triangular plate to be used for the springs on tube for our Highlift and Vertical liftsystemswith cables inside. HSK/VSK . Left version.
Pane for LDP/LDC panoramic section, incl. mountingkit
.jpg?v=122314608)
D-PRO HSI 1X230 control, set for HSI.
Controller comes with emergency stop and has IP65 protection class
Supply voltage must be 1 x 230V.
(Note: Supply cable is permanently mounted on the inverter)
Controller comes with emergency stop and has IP65 protection class
Supply voltage must be 1 x 230V.
(Note: Supply cable is permanently mounted on the inverter)
5-pin green connector. Used for PRO-LINE control.
6-pin black connector. Used for PRO-LINE control.
.jpg?v=122524902)
Barrel bolt lock for U3, QP right side
Skjutregellås till U3, QP Höger sida, QP left side
1m spiral, 1.6m straight cable, orange, including z-brackets and connectors.
Spiral stretch 1:3.
Spiral stretch 1:3.
.jpg?v=122524286)
1,5m spiral, 5 m straight cable, orange, including z-brackets and connectors.
Spiral stretch 1:3.
25 pcs per colli
Spiral stretch 1:3.
25 pcs per colli
Foil incl. circuit board for Marantec CS310
Spiral cable 5 x 0,5mm, black. L = 300/800/1600
5 pcs per colli
5 pcs per colli
.jpg?v=122641083)
Spiral cable 5 x 0,5mm, black. L = 300/800/3000
5 pcs per colli
5 pcs per colli
_(2).jpg?v=122641086)
Spiral cable 5 x 0,5mm, black. L = 300/800/5000
5 pcs per colli
5 pcs per colli
Underlay plate for Lindab side/middle hinges
Galvanised
Used for low-lift FF
90 x 85 mm, L = 5442 mm.
Used for low-lift FF
90 x 85 mm, L = 5442 mm.
Bottom sealing suitable for Hörmann SPU 30/40.
Not original.
Not original.
Ferrite core for use in light grids or other electrical accessories, where electrical noise in an installation can be problematic.
Parts for top section 342/542. Includes 2 top hinges, 2 rollers and 8 bolts
GFA motor with release clutch. 90Nm, 24 RPM,
suitable for 1" shaft, and including key for hollow shaft. 3x230/400V IP65.
suitable for 1" shaft, and including key for hollow shaft. 3x230/400V IP65.
GFA chain release motor. 90Nm, 24 RPM, suitable for 1" shaft, and including key for hollow shaft.
3x230/400V IP65.
4 meter chains are included as standard.
3x230/400V IP65.
4 meter chains are included as standard.
GFA motor with release clutch. 90Nm, 30 RPM, suitable for 1" shaft, and including key for hollow shaft.
3x230/400V IP65.
3x230/400V IP65.
GFA motor with release clutch. 90Nm, 20 RPM, suitable for 1" shaft, and including key for hollow shaft.
3x230/400V IP65.
3x230/400V IP65.
GFA chain release motor. 90Nm, 20 RPM, suitable for 1" shaft, and including key for hollow shaft.
3x230/400V IP65.
4 meter chains are included as standard.
3x230/400V IP65.
4 meter chains are included as standard.
GFA chain release motor. 90Nm, 21 RPM, suitable for 5/4" shaft, and including key for hollow shaft.
3x230/400V IP65.
4 meter chains are included as standard.
3x230/400V IP65.
4 meter chains are included as standard.
GFA chain release motor with frequency converter. 80Nm, 60 RPM, suitable for 1" shaft, and including key for hollow shaft.
1x230V IP65.
1x230V IP65.