250 x 500 x 10 mm. Protects the rubber surface from unnecessary rapid wear from the rear loading edge of the truck
250 x 500 x 10 mm, without nut. Loose mounting plate for RB500 bumper. Supplied without M20 nut for attaching loose rubber bumper
250 x 300 x 10 mm, without nut. Loose mounting plate for RB300 bumper. Supplied without M20 nut for attaching loose rubber bumper
With 3 holes, 80 x 40 mm. Loose mounting plate for narrow bumper. Used for assembly of narrow bumper with 3 holes
70 x 390 x 80 mm, without mounting. Narrow bumper for leveler, 70 x 390 x 80 mm WxHxD. Mounting plate for rubber bumper block is purchased separately
250 x 500 x 100 mm. Rubber block for bumper RB500 for levelers, 250 x 500 x 100 mm (WxHxD). Two Ø 24 mm holes for mounting
250 x 300 x 100 mm. Rubber block for bumper RB300 for levelers, 250 x 300 x 100 mm (WxHxD). Two Ø 24 mm holes for mounting
Complete bumper for leveler, 250 x 500 x 100 mm.
Incl. 10 mm mounting plate and 10 mm protective plate for mounting on the front of the rubber block. Spare rubber block can be purchased separately
Incl. 10 mm mounting plate and 10 mm protective plate for mounting on the front of the rubber block. Spare rubber block can be purchased separately
* Discontinued - Sold as long as stocks last *
Complete bumper for leveler, 250 x 300 x 100 mm.
Incl. 10 mm mounting plate and 10 mm protective plate for mounting on the front of the rubber block. Spare rubber block can be purchased separately
Complete bumper for leveler, 250 x 300 x 100 mm.
Incl. 10 mm mounting plate and 10 mm protective plate for mounting on the front of the rubber block. Spare rubber block can be purchased separately
.jpg?v=120373499)
250 x 600 x 160 mm. Mobile bumper for levelers, 250 x 600 x 160mm. Complete with spring-mounted rubber bumper. The rubber bumper follows the truck up and down during loading / unloading
250 x 500 x 100 mm. Complete bumper for leveler. Incl. 10 mm mounting plate. Welded to the leveler. Spare rubber block can be purchased separately
250 x 300 x 100 mm. Complete bumper for leveler. Incl. 10 mm mounting plate. Welded to the leveler. Spare rubber block can be purchased separately
Type UDL2, Norwegian processor, 930. Main print for Loading Systems leveler controls. For 1-2-3 valves. Suitable for levelers with both hinged and sliding lip, for control boxes with 1, 2 and 4 buttons. Processor English: Lip is lifted slightly on return - retracted slightly, lifted to max
K4 relay PCB for UST1. Module Print for Loading Systems UST1 and UST1L Controls. Limit contacts
Elect. limit sw, 3x400 VAC, UST1KL. Loading Systems Control board type UST1 KL / 400VAC. Used on Loading Systems doors
built-in". Complete safety switch for controls. Can be locked with padlock (not included). Mounted directly in lid. Fits on Loading Systems Controls, among other things
incl. flat cable for control box. Relay print for Loading System shelter Type 407. Suitable for UDL2. New version with watch dog on data communication for main print
PCB K2 for UDL2. Module print for Loading Systems control UST1 and UST1KL. Used in connection with safety edge
Function 9. Activation key for extra features. P-EEP 930M Function 9 = Door. Used when running leveler and door in sequence
Function: 1-3-4-5-6-7-8-9=ON, 2=OFF. Activation key for extra features. P-EEP Features: 1 = Wheel lock, 2 = Car detection, 3 = Safety grille, 4 = External traffic light, 5 = Internal traffic light, 6 = dock light, 7 = Sirene, 8 = inflatable shelter, 9 = door
Type UDL2, Standard processor, 930. Main print for Loading Systems leveler control with 1 - 2 - 4 buttons. Suitable for levelers with both hinged and sliding lip and 1, 2 and 3 valves. Standard processor: Lip is lifted by return directly to max height before resting position
Suitable for hinged lip and 1 valve. Main print for Loading Systems control with 1 button. Fits levelers with hinged lip and 1 valve
With case, for hinged lip. Loading Systems control box, for leveler with hinged lip. The control has two buttons (Up / Return)
With case, for hinged lip. Loading Systems control box, for leveler with hinged lip. The controller has one button
Right/left, L = 3330 mm. Front frame profile for Loading System's shelter type 403M.
For LS front frame 403M. Joint for Loading Systems front frame, type 403M. Used for assembly of horizontal and vertical profile
Strap with 2 eyes for top curtain/b. Rubber strap for Loading Systems shelter type 403M. The strap with 2 eye connections is mounted at the top curtain or bottom. L = 400 mm
Strap at top curtain, L = 500 mm. Rubber strap for Loading Systems shelter type 403M. The strap is mounted at the top curtain. L = 500 mm
Strap at top curtain, L = 275 mm. Rubber strap for Loading Systems shelter type 403M. The strap is mounted at the top curtain. L = 275 mm