With 1 relay output. Used for comfort model before .2 version. Function is programmed in motor
With 1 relay output. Used for comfort model before .2 version. Function is programmed in motor
Command 613. Fits Marantec comfort openers with system cable connector. For motors with display, EP141 must also be used
Command 105 with 7 m cable. Fits Marantec comfort openers with system cable connector. For motors with display, EP141 must also be used
Short version. For remote control
Digital 371, Multi-Bit. Plug receiver for mounting in 230V socket with relay output
MARANTEC external reciever/antenna with 7.5 meter Plug-in cable 868 MHz. DIGITAL 173
For Comfort motors. Fits comfort 220, 220.2, 250, 250.2, 252, 252.2 og 257
For mini remote control. Fits Marantec Digital 302 og 304
For opener rail with cord.
Suitable for SK & ST rails. Marantec pin for connecting slider. Suitable for SK and ST rails
For opener rail with chain.
MARANTEC connector for SK rail with roller chain
MARANTEC wireless code keypad 868 MHz, type 231, MBK2. Can control up to 3 doors or 3 different codes. Uses 2 pieses CR 2032 batteries
868 MHz, Digital 323. For mounting in the car's cigarette lighter
MARANTEC Micro transmitter 868 MHz. DIGITAL 313 Includes sliding cover for buttons.
For Comfort motors. Insert receiver for comfort 260, 270, 280, 360, 370 and 380 if Multibit radio is desired
Loosely cover the keypad type MBK2
Command 231.
Command 231.
2 remote controls and 1 receiver. Upgrading all types of garage door openers to modern 868 MHz remote controls requires push button input on existing motor. Consists of 1 piece. Digital 371 and 2 Digital 382. The receiver is for mounting in a 230V plug
Transition, old to new model. Connection between Multi-Bit handheld transmitter with three holes for coding and older system without 3 holes in the house
Command 231. NOTE: This is for 433 MHz
External release clutch type SPEC30.
With 3 relay outputs. Marantec output module with relay signal for open door, closed door and light. Requires Marantec EP141 if it is for garage door openers with display
MARANTEC SPECIAL 501, system cable extension 7 metres, for internal pushbutton
With connector at both ends.
With connector at both ends.
Type special 630, IP65. For securing the door opening. Fits Marantec comfort openers