T 500 mA. Suitable for EHLDB
Emergency stop, complete for EHLD.
For fitting in control unit cover.
For fitting in control unit cover.
UP-STOP-DOWN complete for EHLD.
With PCB and switches.
With PCB and switches.
For Nice garage products.
With orange wire. Control print for Dalmatic controls.
TYPE PICMINI V.1.1
TYPE PICMINI V.1.1
For tilt, radio and loop detector.
PIC823A Closing on photocell 1.0 s. Control board for Lindab EHLD control
PIC863A Closing on photocell 0.05 s. Control board for Lindab EHLD control
PIC803A, standard. Control board for Lindab EHLD control
JE 110 PV7 for EHS and EHM. Control print for Dalmatic controls
Blue programme. For Dalmatic controls
Max. 20 m²,15 openings/hour 50 Nm 3. Incl. mounting bracket and two wedges. Excl. handheld transmitter / receiver
.JPG?v=108877855)
3 x 230/400 V 0.55 kW, M7436, with.
3 x 230/400 V, 0.55 kW, type 7076.
For end stop, red, type 433.
End stop switch with cable. End stop switch with cable, type 473
85 mm diameter clutch disc for motor, type 084.
85 mm diameter clutch disc for gear.
Disengagement level type 260.
Ovitor P/N: 260.
Ovitor P/N: 260.
For TVR gear (Ovitor). For Ovitor TVR gear. Weak spring for coupling (2 pieces used), type 464
Standard spring. Outer diameter = 12mm, length = 150mm, steel
Diameter 85/28 x 3 mm clutch coating, type 481.
For Ovitor motor
For Ovitor motor
4 mm chain for, OVITOR. Galvanized
50 mm, for expansion PCB.