_(2).jpg?v=112666356)
Motor cable NICE 20 meter, Cable LPPRO for NICE motor. Cable between LPPRO control unit and NICE motor with power monitoring.
.jpg?v=112666351)
Motor cable NICE 15 meter, Cable LPPRO for NICE motor. Cable between LPPRO control unit and NICE motor with power monitoring.
Motor cable NICE 11 meter, Cable LPPRO for NICE motor. Cable between LPPRO control unit and NICE motor with power monitoring.
_(2)_(3)_(4).jpg?v=112666358)
Motor cable NICE 7 meter, Cable LPPRO for NICE motor. Cable between LPPRO control unit and NICE motor with power monitoring.
_(2)_(3).jpg?v=112666357)
Motor cable NICE 5 meter, Cable LPPRO for NICE motor. Cable between LPPRO control unit and NICE motor with power monitoring.
.jpg?v=115003872)
NICE motor 140Nm, 20rpm, 1", BK4N IP54 with chain release. Motor can also be used with Lindab EHLDC control unit. Another motor cable is required.
(KABEHCNICE07, KABEHCNICE11, KABEHCNICE20)
(KABEHCNICE07, KABEHCNICE11, KABEHCNICE20)
_(2).jpg?v=115003879)
NICE motor 140Nm, 20rpm, 5/4", BK6N IP54 with chain release. Motor can also be used with Lindab EHLDC control unit. Another motor cable is required.
(KABEHCNICE07, KABEHCNICE11, KABEHCNICE20)
(KABEHCNICE07, KABEHCNICE11, KABEHCNICE20)
NICE motor 100Nm, 24rpm, 1", BF7N IP54 with release clutch. Motor can also be used with Lindab EHLDC control unit. Another motor cable is required.
(KABEHCNICE07, KABEHCNICE11, KABEHCNICE20)
(KABEHCNICE07, KABEHCNICE11, KABEHCNICE20)
_(2).jpg?v=115004108)
NICE motor 140Nm, 20rpm, 5/4", BF5N IP54 with release clutch. Motor can also be used with Lindab EHLDC control unit. Another motor cable is required.
(KABEHCNICE07, KABEHCNICE11, KABEHCNICE20)
(KABEHCNICE07, KABEHCNICE11, KABEHCNICE20)
.jpg?v=115004088)
NICE motor 140Nm, 20rpm, 1", BF4N IP54 with release clutch. Motor can also be used with Lindab EHLDC control unit. Another motor cable is required.
(KABEHCNICE07, KABEHCNICE11, KABEHCNICE20)
(KABEHCNICE07, KABEHCNICE11, KABEHCNICE20)
NICE motor 80Nm, 30rpm, 1", BF1N IP65 with release clutch. Motor can also be used with Lindab EHLDC control unit. Another motor cable is required.
(KABNICEVASK07)
(KABNICEVASK07)
_(2)_(3)_(4).jpg?v=115004153)
NICE motor 80Nm, 30rpm, 1", BF1N IP54 with release clutch. Motor can also be used with Lindab EHLDC control unit. Another motor cable is required.
(KABEHCNICE07, KABEHCNICE11, KABEHCNICE20)
(KABEHCNICE07, KABEHCNICE11, KABEHCNICE20)
NICE motor 100Nm, 24rpm, 1", BK1N IP54 with chain release. Motor can also be used with Lindab EHLDC control unit. Another motor cable is required.
(KABEHCNICE07, KABEHCNICE11, KABEHCNICE20)
(KABEHCNICE07, KABEHCNICE11, KABEHCNICE20)
Basic PCB for LP-Pro control. Used for 3 x 230V supply and 1 x 230V supply, including frequency converter electric operation. Basic PCB is also used in HSI control.
Basic PCB for LP-Pro control. Used for 3 x 400V supply
.JPG?v=110030914)
Chain for NICE chain drive
.JPG?v=110030921)
Chain assembler for NICE chain
.jpg?v=120377280)
DW40 in mounting box - complete.
Contains
1 pcs membrane box
1 pcs hose
5 pcs coupling sleeves
4 pcs zip ties
1 pcs DW (excl. print)
Note. This is not for an LP-PRO.
DW for an LP-PRO: Search for item number DWPRO
Replace DWLDB01 / 082139
ATTENTION! As this is a universal assembly kit, instructions are not included.
Reference is made instead to the original instructions for door control.
Contains
1 pcs membrane box
1 pcs hose
5 pcs coupling sleeves
4 pcs zip ties
1 pcs DW (excl. print)
Note. This is not for an LP-PRO.
DW for an LP-PRO: Search for item number DWPRO
Replace DWLDB01 / 082139
ATTENTION! As this is a universal assembly kit, instructions are not included.
Reference is made instead to the original instructions for door control.
.jpg?v=120377277)
DW40 on print in box.
Used for LP Pro controls.
Used for LP Pro controls.
Magnetic absolute encoder for all NICE motors used with the LP-Pro controller. Does not fit the HSI motors.
LP-PRO carwash control for 3 x 400V with built-in thermostat, heater, venting and auto on/off switch. Control is IP65
.jpg?v=117741497)
LP-PRO carwash control for 3 x 230V with built-in thermostat, heater, venting and auto on/off switch. Control is IP65
.jpg?v=115005480)
Foil for control cover LP-Pro
4mm chain to extend chain on PRO-LINE chain motor. Cut to size.
Kostal encoder til motor. Fits Becker, NICE, MFZ and others.
Heating element for LP Pro wash, mounted in aluminium tubes.
LP-PRO control for 3 x 400V with power monitoring, display and emergency stop. In order for power monitoring to be used, it must be together with the NICE motor from Lindab.
LP-PRO control for 1 x 230V for frequency converter. Including power monitoring, display and emergency stop. In order for power monitoring to be used, it must be together with a NICE motor from Lindab.
Note: frequency converter to be ordered separately.
.
Note: frequency converter to be ordered separately.
.
LP-PRO control for 3 x 230V with power monitoring, display and emergency stop. In order for power monitoring to be used, it must be together with the NICE motor from Lindab.
LP-Pro control cover, Including emergency stop
Remember PRIPROLG-2
Remember PRIPROLG-2