LP-Pro control cover, Including emergency stop
Remember PRIPROLG-2
Remember PRIPROLG-2
LP-Pro print i låg, print med display. Version 2.
Set with 4 mounting brackets, for LP-Pro control
.jpg?v=115005480)
Foil for control cover LP-Pro
Force monitoring pcb for mounting in the LP-Pro control. Works together with NICE motors from Lindab.
Basic PCB for LP-Pro control. Used for 3 x 400V supply
Basic PCB for LP-Pro control. Used for 3 x 230V supply and 1 x 230V supply, including frequency converter electric operation. Basic PCB is also used in HSI control.
CPU processor print vers. 234 for LP-PRO
When the print has been replaced, a factory reset must be made.
The printed circuit board MUST be changed without voltage on the control!
When the print has been replaced, a factory reset must be made.
The printed circuit board MUST be changed without voltage on the control!
Magnetic absolute encoder for all NICE motors used with the LP-Pro controller. Does not fit the HSI motors.
Kostal encoder for motor. Fits Becker, NICE, MFZ and others.
Heating element for LP Pro wash, mounted in aluminium tubes.
Thermostat type TH-H, 0 to 60 degrees, 10A, 250V - Heating element VARMEVASK8W not included.
Locked at 5 degrees for your rail.
Locked at 5 degrees for your rail.
Jumper red, 2,54mm, H = 14 mm
For LP-PRO
For LP-PRO
Til frekvensomformer .