L = 220 mm, complete.
.JPG?v=108876556)
Spring bumper, movement = 300 mm
L = 485 mm, long 30 pcs. per carton (for electrical operation)
L = 485 mm, complete for LP rails. Contains: 2 x spring bumperss, 2 x Z fittings and bolts / nuts
Movement = 300 mm
Moving = 300 mm Long Galvanised (for electrical operation)
L = 485 mm, long
.JPG?v=108876554)
Spring bumper, short movement=100mm
L = 235 mm, 40 pcs.
L = 235 mm, for LP rails. Contains: 2 x spring bumperss, 2 x Z fittings and bolts / nuts
Spring bumper, short movement = 100mm
L = 235 mm
For rail type LP, galvanised.
Extension for product no. BSLMONTF2.
.JPG?v=108857143)
Angle fitting for mounting the spring bumper on the 5C profile. 20 pcs. per carton
On 5C profile, rail type LL2.
Angle fitting for mounting the spring bumper on the 5C profile.
500 mm, H + V (TF). Spring bumper, type TF, with rubber bumper, galvanized steel, not universal, must be ordered as right and / or left
With gear 1:4, incl. chain. Hand chain pull, universal right / left mount directly on 1" shaft, complete with 8 meter chain. 1: 4 exchange
Type F-723A.
Not welded Electroplated
Z-fitting with pulley for 5C profile.
For LD cable tension.
Pulley with bearing for cable tension
Rail type S/ST/H/HT. For FF rails
8.2 x 15 x 4.5 mm.
Tension spring for cable tension type LP, with pulley and safety cable.
Complete incl. spring and wheel.
Type LP1 incl. 15 m cord. LP cable tension "model 2002" for rail type standard and high lift, incl. 15 meter cord
Type LP1/FF incl. 15 m cord. Cable tension for rails type standard and high lift
Type LP incl. 15 m cord. Cable tension for LL, Ver 2. Type LP incl. 15 meter cord, complete for 1 side. Used for low-lift doors with internal pull and angled jamb
Complete for one side. Used with low lift doors with angle- or euro jamb.
Type LP1/FF, incl. 15 m cord.
