Crawford middle hinge, For 542, 75x70mm
Crawford operator CDM9 complete, incl. Control 950A.
Original.
Original.
Crawford roller bracket for side hinge, 11mm, short
Crawford roller, short, 2", 11mm, L = 115mm
Crawford side hinge 342/542, incl. Bracket
The print can be used for both digital and mechanical end stops.
Has a built-in 434 MHz radio receiver.
Has a built-in receiver for wireless edge protection, door contact (requires WSD module).
Up-Stop-Down buttons in lid.
Parameter adjustment with digital display.
2 programmable potential-free relay outputs - e.g. for traffic lights.
Automatic selection of edge protection (optical, 8k2 electrical sensor strip or DW contact 1k2 with test)
Auto close, half open, ventilation open.
Possibility of automatic wire slack compensation or self-adjustment of the closing position when changing the floor height.
Input terminals for pull switch, photocells, edge protection, etc.
Control for more advanced solution than TS970.
Has a built-in 434 MHz radio receiver.
Has a built-in receiver for wireless edge protection, door contact (requires WSD module).
Up-Stop-Down buttons in lid.
Parameter adjustment with digital display.
2 programmable potential-free relay outputs - e.g. for traffic lights.
Automatic selection of edge protection (optical, 8k2 electrical sensor strip or DW contact 1k2 with test)
Auto close, half open, ventilation open.
Possibility of automatic wire slack compensation or self-adjustment of the closing position when changing the floor height.
Input terminals for pull switch, photocells, edge protection, etc.
Control for more advanced solution than TS970.
Pro Loop 2 detector for 1 loop with 2 relay outputs.
Mounting on standard DIN Rail.
Dimensions 22.5 x 94 x 90mm, Supply voltage 100-240 V AC ± 10% , 50 Hz, 12-23mA, Power consumption 2.9VA. Max loop lead 100m 20-40uH (Ø 1.5m2 twisted 20 times per m. Loop inductance 20-1000uH).
Mounting on standard DIN Rail.
Dimensions 22.5 x 94 x 90mm, Supply voltage 100-240 V AC ± 10% , 50 Hz, 12-23mA, Power consumption 2.9VA. Max loop lead 100m 20-40uH (Ø 1.5m2 twisted 20 times per m. Loop inductance 20-1000uH).
Pro Loop 2 detector for 2 loops with 2 relay outputs.
Mounting on standard DIN Rail.
Dimensions 22.5 x 94 x 90mm, Supply voltage 100-240 V AC ± 10% , 50 Hz, 12-23mA, Power consumption 2.9VA. Max loop lead 100m 20-40uH (Ø 1.5m2 twisted 20 times per m. Loop inductance 20-1000uH).
Mounting on standard DIN Rail.
Dimensions 22.5 x 94 x 90mm, Supply voltage 100-240 V AC ± 10% , 50 Hz, 12-23mA, Power consumption 2.9VA. Max loop lead 100m 20-40uH (Ø 1.5m2 twisted 20 times per m. Loop inductance 20-1000uH).
Complete ready-made ground loop for loop detector.
Ready to install.
Circumference 10m and 15 m supply line.
Do not place closer to reinforcement bars than 15 cm.
Ready to install.
Circumference 10m and 15 m supply line.
Do not place closer to reinforcement bars than 15 cm.
Til frekvensomformer .
SPRING SHAFT COUPLING L = 100mm
Mounting flange for ITS radar
Cable for ITS radar 12 pol. 10m long
Consists of DW hose, 2 x hose connector, cable clamps, screws, pop rivets and cable ties
PVC profile for low threshold door, mounted on rail in dooropening
Ø11 mm, short, stainless steel
.jpg?v=122264992)
Crawford roller slider, incl. bolt, nut and roller holder.
For Crawford 1042. Original.
For Crawford 1042. Original.
.jpg?v=122264993)
Crawford intermediate hinge.
For Crawford 1042. Original.
For Crawford 1042. Original.
.jpg?v=122264980)
Spring breakage safety device, right. 35 mm axle, 152 mm spring. Original
.jpg?v=122264981)
Spring breakage safety device, left. 35 mm axle, 152 mm spring. Original
.jpg?v=122264982)
Spring breakage safety device, right. Hexagonal shaft, 152 mm spring. Original
.jpg?v=122264984)
Spring breakage safety device, left. Hexagonal shaft, 152 mm spring. Original
.jpg?v=122264970)
Crawford control board for CDM9. Original.
.jpg?v=122264938)
Crawford control for Crawford/Hafa leveler with hinged lip.
DLSA, can control door, leveler and shelter. With main switch and return button. Original
DLSA, can control door, leveler and shelter. With main switch and return button. Original
.jpg?v=122264939)
Crawford control for Crawford/Hafa leveler with sliding lip.
DLSA, can control door, leveler and shelter. With main switch and return button. Original
DLSA, can control door, leveler and shelter. With main switch and return button. Original
_(2).jpg?v=122264947)
Crawford control for Crawford/Hafa leveler with hinged lip.
DLSA, can control door, and leveler . With main switch and return button. Original
DLSA, can control door, and leveler . With main switch and return button. Original
Crawford control for Crawford/Hafa leveler with sliding lip.
DLSA, can control door, and leveler. With main switch and return button. Original
DLSA, can control door, and leveler. With main switch and return button. Original
Crawford control for Crawford/Hafa leveler with hinged lip.
LA, for leveler only. With main switch and return button. Original
LA, for leveler only. With main switch and return button. Original
Crawford control for Crawford/Hafa leveler with sliding lip.
SLA, can control leveler and shelter. With main switch and return button. Original
SLA, can control leveler and shelter. With main switch and return button. Original
.jpg?v=122264961)
Crawford control for Crawford/Hafa leveler with hinged lip.
L, for leveler only. With main switch. Original
L, for leveler only. With main switch. Original