Spiralkabel 5 x 0,5mm, sort. L = 300/800/1600.

Spiralkabel 5 x 0,5mm, sort. L = 300/800/3000.

Spiralkabel 5 x 0,5mm, sort. L = 300/800/5000.

Underlay plate for Lindab side/middle hinges

Galvanised  
Used for low-lift  FF
90 x 85 mm, L = 5442 mm.

Bottom sealing suitable for Hörmann SPU 30/40. Not original.

With the Maveo plug, you can control your Marantec motor via an app.

The plug simply needs to be inserted into the socket at the back and set up through the Maveo app. (The plug does not require an external power supply)

Compatible with Marantec Comfort 260/270/280/360/370/380 from 2014.
No separate door contact is required.
Ingress protection class IP20.
It is possible to receive notifications when the gate is opened or closed.
The Maveo plug cannot be integrated with other third-party home automation systems.
It is recommended to visit the manufacturer's website for information regarding this in the future.

Ferrite core for use in light grids or other electrical accessories, where electrical noise in an installation can be problematic.

For ramp with sliding beak, 1000 mm. Hydraulic lifting cylinder for Loading Systems ramp with sliding beak, ramp type 233. Working length = 1000 mm, Ø 25 x 1140 mm (DxL)

Parts for top section 342/542. Includes 2 top hinges, 2 rollers and 8 bolts

Hand crank for GLG high speed door

GFA motor with release clutch. 90Nm, 24 RPM,
suitable for 1" shaft, and including key for hollow shaft. 3x230/400V IP65.

GFA chain release motor. 90Nm, 24 RPM, suitable for 1" shaft, and including key for hollow shaft.
3x230/400V IP65.
4 meter chains are included as standard.

GFA motor with release clutch. 90Nm, 30 RPM, suitable for 1" shaft, and including key for hollow shaft.
3x230/400V IP65.

GFA motor with release clutch. 90Nm, 20 RPM, suitable for 1" shaft, and including key for hollow shaft.
3x230/400V IP65.

GFA chain release motor. 90Nm, 20 RPM, suitable for 1" shaft, and including key for hollow shaft.
3x230/400V IP65.
4 meter chains are included as standard.

GFA chain release motor. 90Nm, 21 RPM, suitable for 5/4" shaft, and including key for hollow shaft.
3x230/400V IP65.
4 meter chains are included as standard.

GFA chain release motor with frequency converter. 80Nm, 60 RPM, suitable for 1" shaft, and including key for hollow shaft.
1x230V IP65.

GFA chain release motor with frequency converter. 140Nm, 80 RPM, suitable for 1" shaft, and including key for hollow shaft.
3x230/400V HSI IP65.
4 meter chains are included as standard.

Cord for disengagement and chain connection.
Black 2mm PP cross-braided with core.
One roll = 220 meters

Chain for GFA chain drive, rolls of 50m

Chain assembler for GFA

Packs of 10 pcs.

Motor console for GFA 8.60FOK.

Supplement to BSLMOCOBE3

Emergency stop for LD971/LD971V

Rotary switch 1/0 for LD971/LD971V

3-pin, 16A CEE plug for mains supply (1N~230Vac) on 0.7 meter cable with gland and connection terminal for controls (types: TS959, TS970 and LD971).

4-pin, 16A CEE plug for mains supply (3~230Vac) on 0.7 meter cable with gland and connection terminal for controls (types: TS959, TS970 and LD971).

5-pin, 16A CEE plug for mains supply (3N~400Vac) on 0.7 meter cable with gland and connection terminal for controls (types: TS959, TS970 and LD971).

GFA motor cable 5 meters for LD971. Type DES, electronic limit switch.
Including gland and plug.

GFA motor cable 7 meters for LD971. Type DES, electronic limit switch.
Including gland and plug.