.jpg?v=124285630)
Cable duct with lid
20 x 35 x 2000 mm, RAL9010, white
20 x 35 x 2000 mm, RAL9010, white
Cable duct with lid
20 x 20 x 2000 mm, RAL9010, white
20 x 20 x 2000 mm, RAL9010, white
Slack cable switch for bottom hinge, Condoor.
Up to 450 kg.
This item replaces: KONTWISLBUQP5630
Up to 450 kg.
This item replaces: KONTWISLBUQP5630
Outside/inside Alu/Alu. 675 x 44 x 9300 mm aluminum stucco.
Original.
Original.
.jpg?v=124419038)
Outside/inside Alu/Alu. 675 x 44 mm aluminum stucco.
Original.
Original.
_(2)_(3)_(4).jpg?v=124419041)
Outside/inside Alu/Alu. 675 x 44 mm aluminum stucco.
Original.
Original.
_(2)_(3).jpg?v=124419040)
Outside/inside Alu/Alu. 675 x 44 mm aluminum stucco.
Original.
Original.
_(2).jpg?v=124419039)
Outside/inside Alu/Alu. 675 x 44 mm aluminum stucco.
Original.
Original.
Steel filling 28 mm, for frame sections
Alu-fyldning 28 mm, for ramme sektioner.
Wind reinforcement Crawford/Assa type 80 mm, galvanized steel
L = 8500mm
L = 8500mm
Wind reinforcement Crawford/Assa type 122 mm, galvanized steel
L = 8500mm
L = 8500mm
End piece for wind reinforcement Crawford/Assa. For type 80 mm, left.
End piece for wind reinforcement Crawford/Assa. For type 80 mm, right.
GFA emergency chain operation, 4 m chain – SE
.jpg?v=120373502)
Control unit for Marantec motor without BlueLine technology.
Control unit for Marantec motor with BlueLine technology.
2" roller, nylon, stainless steel.
Ø 11 mm, L = 186 mm.
Ø 11 mm, L = 186 mm.
Hörmann profile 6000mm for 500/750 panel
Top cassette Hörmann 6100 mm.
Fits 500/750 panel.
Fits 500/750 panel.
Replaces smoke detector type 601P. Fits the same base type as the 601P.
Supplied without base.
Supplied without base.
Profile for protection of wind reinforcement at an integrated wicket door.
Supplied in standard length, 1123 mm.
Supplied in standard length, 1123 mm.
FZ/Nylan 500 finish, 4.2x50 mm
Top seal Hörmann, H 40 500/750 mm.
36 mm.
36 mm.
Narrow side cassette for raised Lindab top section.
10 m cable set between motor and control unit for a Lindab BA2
GFA chain release motor with frequency converter. 140Nm, 100 RPM, suitable for 5/4" shaft, and including key for hollow shaft.
3x230/400V IP65.
4 meter chains are included as standard.
3x230/400V IP65.
4 meter chains are included as standard.
_(2)_(3)_(4)_(5)_(6).jpg?v=124864168)
2-pole relay which can be used, among other things, to transmit signals from photocells to a washing machine in a car wash facility.
Relay including DIN rail socket.
Coil voltage: 24 VDC
Max. current through contact set: 8 A
Relay including DIN rail socket.
Coil voltage: 24 VDC
Max. current through contact set: 8 A