.jpg?v=123263082)
5-pin, 16A CEE plug for mains supply (3N~400Vac) on 0.7 meter cable with gland and connection terminal for controls (types: TS959, TS970 and LD971).
_(2)_(3).jpg?v=123265279)
GFA motor cable 5 meters for LD971.
Type DES, electronic limit switch.
5 pcs per colli
Type DES, electronic limit switch.
5 pcs per colli
_(2)_(3)_(4).jpg?v=123265280)
GFA motor cable 7 meters for LD971.
Type DES, electronic limit switch.
5 pcs per colli
Type DES, electronic limit switch.
5 pcs per colli
GFA motor cable 11 meters for LD971.
Type DES, electronic limit switch.
5 pcs per colli
Type DES, electronic limit switch.
5 pcs per colli
.jpg?v=123265277)
GFA motor cable 15 meters for LD971.
Type DES, electronic limit switch.
5 pcs per colli
Type DES, electronic limit switch.
5 pcs per colli
_(2).jpg?v=123265278)
GFA motor cable 25 meters for LD971.
Type DES, electronic limit switch.
5 pcs per colli
Type DES, electronic limit switch.
5 pcs per colli
Motor cable GFA 8.60FOK/LD971, 5 m.
Including gland and plug.
5 pcs per colli
Including gland and plug.
5 pcs per colli
.jpg?v=123265274)
Motor cable GFA 8.60FOK/LD971, 7 m.
Including gland and plug.
5 pcs per colli
Including gland and plug.
5 pcs per colli
_(2).jpg?v=123265275)
Motor cable GFA 8.60FOK/LD971, 11 m.
Including gland and plug.
5 pcs per colli
Including gland and plug.
5 pcs per colli
Cord kit with a length of 2x 7 meters with a red and a green handle.
Only suitable for motor : GEMOGFA8.60FOK
Only suitable for motor : GEMOGFA8.60FOK
Z-bracket for securing spiral cable. Supplied with bend protection and nut (M16)
Kile for massivaksel for GFA motor.
6,35 x 6,35 x 130 mm.
Med 2 stk. M4 skruer med lige kærv..
6,35 x 6,35 x 130 mm.
Med 2 stk. M4 skruer med lige kærv..
Key for hollow shaft for GFA motor.
6.35 x 9.53 x 130 mm.
With 2 pcs. M4 screws with straight slot
6.35 x 9.53 x 130 mm.
With 2 pcs. M4 screws with straight slot
The GFA stick provides wireless access via Bluetooth 4.0 to GFA controllers (TS959, TS970, LD971).
Read the following data:
General: Serial number, software version, temperature.
Drive: Serial number, type, article number.
Settings: Operating mode, automatic closing, etc.
Errors: Last 6 errors (with error guide).
Log: Last 128 actions (open/close, stop, etc.).
Reset: Last factory reset.
Read the following data:
General: Serial number, software version, temperature.
Drive: Serial number, type, article number.
Settings: Operating mode, automatic closing, etc.
Errors: Last 6 errors (with error guide).
Log: Last 128 actions (open/close, stop, etc.).
Reset: Last factory reset.
Lindab motor bracket for GFA/Nice/BA2/Becker.
Mounts as a bearing plate
Mounts as a bearing plate
Lindab motor bracket for GFA/Nice/BA2/Becker.
Mounts on 5C profile
Mounts on 5C profile
LD971 control unit with integrated up-stop-down control for pulse or deadman operation.
Equipped with an integrated radio plug-in receiver (433MHz) and prepared for wireless safety edge protection (type: WSD).
3 x 400V CEE plugs, on a 0.7 meter cable included.
Compatible with GFA control – model TS971
Equipped with an integrated radio plug-in receiver (433MHz) and prepared for wireless safety edge protection (type: WSD).
3 x 400V CEE plugs, on a 0.7 meter cable included.
Compatible with GFA control – model TS971
LD971 control unit with integrated up-stop-down control for pulse or deadman operation.
Equipped with an integrated radio plug-in receiver (433MHz) and prepared for wireless safety edge protection (type: WSD).
3 x 230V CEE plugs, on a 0.7 meter cable included.
Compatible with GFA control – model TS971
Equipped with an integrated radio plug-in receiver (433MHz) and prepared for wireless safety edge protection (type: WSD).
3 x 230V CEE plugs, on a 0.7 meter cable included.
Compatible with GFA control – model TS971
LD971 control unit with integrated up-stop-down control for pulse or deadman operation.
Equipped with an integrated radio plug-in receiver (433MHz) and prepared for wireless safety edge protection (type: WSD).
1 x 230V CEE plugs, on a 0.7 meter cable included.
Compatible with GFA control – model TS971
Equipped with an integrated radio plug-in receiver (433MHz) and prepared for wireless safety edge protection (type: WSD).
1 x 230V CEE plugs, on a 0.7 meter cable included.
Compatible with GFA control – model TS971
.jpg?v=123457125)
Control LD971V, with supply cable 3x400V.
Incl. heater, ventilation valve. 971XL box.
W x H x D = 300 x 400 x 132mm
Incl. heater, ventilation valve. 971XL box.
W x H x D = 300 x 400 x 132mm
.jpg?v=123457124)
Control LD971V, with supply cable 3x230V.
Incl. heater, ventilation valve. 971XL box.
W x H x D = 300 x 400 x 132mm
Incl. heater, ventilation valve. 971XL box.
W x H x D = 300 x 400 x 132mm
.jpg?v=123283798)
Control LD971 and clutch release motor 9.24F, 24 RPM/90NM. IP 65 and for 1" shaft. Including keys for hollow and solid shaft, DW, spiral cable, 7m motor cable, supply cable 3x400V and motor bracket.
Control LD971 and chain motor 9.24K, 24 RPM/90NM. IP 65 and for 1" shaft.
Including keys for hollow and solid shaft, DW, spiral cable, 7m motor cable, supply cable 3x400V and motor bracket.
4 meter chains are included as standard.
Including keys for hollow and solid shaft, DW, spiral cable, 7m motor cable, supply cable 3x400V and motor bracket.
4 meter chains are included as standard.
Control LD971 and clutch release motor 9.24F, 24 RPM/90NM. IP 65 and for 1" shaft. Including keys for hollow and solid shaft, DW, spiral cable, 7m motor cable, supply cable 3x230V and motor bracket.
Control LD971 and chain motor 9.24K, 24 RPM/90NM. IP 65 and for 1" shaft.
Including keys for hollow and solid shaft, DW, spiral cable, 7m motor cable, supply cable 3x230V and motor bracket.
4 meter chains are included as standard.
Including keys for hollow and solid shaft, DW, spiral cable, 7m motor cable, supply cable 3x230V and motor bracket.
4 meter chains are included as standard.
Control LD971 and clutch release motor 9.24F, 24 RPM/90NM. IP 65 and for 1" shaft. Including keys for hollow and solid shaft, DW, spiral cable, 11m motor cable, supply cable 3x400V and motor bracket.
.jpg?v=123283233)
Control LD971 and chain motor 9.24K, 24 RPM/90NM. IP 65 and for 1" shaft. Including keys for hollow and solid shaft, DW, spiral cable, 11m motor cable, supply cable 3x400V and motor bracket.
4 meter chains are included as standard.
4 meter chains are included as standard.
.jpg?v=123283203)
Control LD971 and clutch release motor 9.24F, 24 RPM/90NM. IP 65 and for 1" shaft. Including keys for hollow and solid shaft, DW, spiral cable, 11m motor cable, supply cable 3x230V and motor bracket.
.jpg?v=123283251)
Control LD971 and chain motor 9.24K, 24 RPM/90NM. IP 65 and for 1" shaft.
Including keys for hollow and solid shaft, DW, spiral cable, 11m motor cable, supply cable 3x230V and motor bracket.
4 meter chains are included as standard.
Including keys for hollow and solid shaft, DW, spiral cable, 11m motor cable, supply cable 3x230V and motor bracket.
4 meter chains are included as standard.