Marantec RS300V control for Loading leveler with telescopic lip.
In white box (IP65) with 4 buttons (up, out, in and return).
Box dimensions: 215 x 275 x 190 mm (WxHxD).
Control board is standard RS300K but with special Loading software. Power supply 3x400V AC, N, PE / 3x230V AC, PE. Internal power supply 24 VDC / 2.2Amp. Max valve load: 24 VDC/0.6 Amp. Hydraulic pump max: 2.2KW / 8A.
In white box (IP65) with 4 buttons (up, out, in and return).
Box dimensions: 215 x 275 x 190 mm (WxHxD).
Control board is standard RS300K but with special Loading software. Power supply 3x400V AC, N, PE / 3x230V AC, PE. Internal power supply 24 VDC / 2.2Amp. Max valve load: 24 VDC/0.6 Amp. Hydraulic pump max: 2.2KW / 8A.
Hydraulic power pack in plastic tank. 4.3cc/1.1kW/10L for Loading levelers type 232 150/180 kN (1 valve), Weight 13 Kg
Hydraulic power pack. 1.1kW/5L for Loading levelers type 233M/233NG (3 valve) complete with cables, Weight 16,1 Kg
Complete Sommer/Aperto GIGA Control controller for GLG high-speed door with frequency converter Edge protection: Photocells/Light curtain (OSE)/Electrical sensor list/DW. Cabinet: 350x200x150mm, IP54. Max motor 1.1kW
Loose Sommer GIGA Control control board for STYGLGHP
60N motor with built-in frequency converter for GLG high-speed door. 1 KW motor, 115 RPM
30N motor with built-in frequency converter for GLG High-speed door. 0.55 KW, 115RPM, Typical for small High-speed doors.
Loose control board for GEMOGLGFO30N and GEMOGLGFO60N
Pro Loop 2 detector for 1 loop with 2 relay outputs.
Mounting on standard DIN Rail.
Dimensions 22.5 x 94 x 90mm, Supply voltage 100-240 V AC ± 10% , 50 Hz, 12-23mA, Power consumption 2.9VA. Max loop lead 100m 20-40uH (Ø 1.5m2 twisted 20 times per m. Loop inductance 20-1000uH).
Mounting on standard DIN Rail.
Dimensions 22.5 x 94 x 90mm, Supply voltage 100-240 V AC ± 10% , 50 Hz, 12-23mA, Power consumption 2.9VA. Max loop lead 100m 20-40uH (Ø 1.5m2 twisted 20 times per m. Loop inductance 20-1000uH).
Pro Loop 2 detector for 2 loops with 2 relay outputs.
Mounting on standard DIN Rail.
Dimensions 22.5 x 94 x 90mm, Supply voltage 100-240 V AC ± 10% , 50 Hz, 12-23mA, Power consumption 2.9VA. Max loop lead 100m 20-40uH (Ø 1.5m2 twisted 20 times per m. Loop inductance 20-1000uH).
Mounting on standard DIN Rail.
Dimensions 22.5 x 94 x 90mm, Supply voltage 100-240 V AC ± 10% , 50 Hz, 12-23mA, Power consumption 2.9VA. Max loop lead 100m 20-40uH (Ø 1.5m2 twisted 20 times per m. Loop inductance 20-1000uH).
Complete ready-made ground loop for loop detector.
Ready to install.
Circumference 10m and 15 m supply line.
Do not place closer to reinforcement bars than 15 cm.
Ready to install.
Circumference 10m and 15 m supply line.
Do not place closer to reinforcement bars than 15 cm.
Thermal fire detector in IP67 housing.
With LED indicator.
Supply voltage 12-30 VDC.
Current consumption: 0mA - (not active) 6-40mA (±400 Ohm) (in case of alarm),
Fits e.g. ABDL4000 (Remember 2K2 End resistor).
Working temperature -40°C (Min), +25°C (Norm), +50°C (Max). Dimensions: ø100 x 75mm. 3 end caps.
Used in aggressive environments - e.g. biogas plants, stable environments and areas where everything is washed VERY thoroughly.
Remote sensor supply 2 VDC / 10mA. ATEX classification: II 3 G Ex ic IIC T5 Gc, II 3 D Ex ic IIIC T100°C Dc -40°C ≤ Ta ≤ 50°C / EN 60079-0:2009, EN 60079-11:2012. Sensor for 72°C, 87°C and 117°C available.
With LED indicator.
Supply voltage 12-30 VDC.
Current consumption: 0mA - (not active) 6-40mA (±400 Ohm) (in case of alarm),
Fits e.g. ABDL4000 (Remember 2K2 End resistor).
Working temperature -40°C (Min), +25°C (Norm), +50°C (Max). Dimensions: ø100 x 75mm. 3 end caps.
Used in aggressive environments - e.g. biogas plants, stable environments and areas where everything is washed VERY thoroughly.
Remote sensor supply 2 VDC / 10mA. ATEX classification: II 3 G Ex ic IIC T5 Gc, II 3 D Ex ic IIIC T100°C Dc -40°C ≤ Ta ≤ 50°C / EN 60079-0:2009, EN 60079-11:2012. Sensor for 72°C, 87°C and 117°C available.
Standard UPS system for e.g. 230 volt 0.55 KW inverter motor with relay output for missing supply voltage.
Battery pack consisting of 4 pcs. 12 Volt 9 Ah. Batteries.
Dimensions 570x340x220mm. IP44. supply voltage 176-300 VAC.
Working temperature 0-25°C. Power 1800W, THD sine wave <2%. Max overload 1min 105-130%. Battery lifetime 10-12 years AGM - UPS type: Offline. Cutover time 15ms
Battery pack consisting of 4 pcs. 12 Volt 9 Ah. Batteries.
Dimensions 570x340x220mm. IP44. supply voltage 176-300 VAC.
Working temperature 0-25°C. Power 1800W, THD sine wave <2%. Max overload 1min 105-130%. Battery lifetime 10-12 years AGM - UPS type: Offline. Cutover time 15ms
Standard UPS system for 230 Volt 3 KW inverter motor with relay output for missing supply voltage.
Battery pack consisting of 6 pcs. 12 Volt 9 Ah. Batteries. Dimensions 570x340x220mm. IP44. supply voltage 176-300 VAC. Working temperature 0-25°C. Power 1800W, THD sine wave <2%. Max overload 1min 105-130%.
Battery lifetime 10-12 years AGM - UPS type: Offline. Cutover time 10ms
Battery pack consisting of 6 pcs. 12 Volt 9 Ah. Batteries. Dimensions 570x340x220mm. IP44. supply voltage 176-300 VAC. Working temperature 0-25°C. Power 1800W, THD sine wave <2%. Max overload 1min 105-130%.
Battery lifetime 10-12 years AGM - UPS type: Offline. Cutover time 10ms
Til frekvensomformer .
SPRING SHAFT COUPLING L = 100mm
Hardware box, base. Large
.JPG?v=120661447)
Hardware box, lid. Large
The spring tensioner fits springs type 67, 95 and 152mm. Max torque 500 Nm.
Fits ConDoor, Hörmann, Novoferm and Alpha springs up to 50 mm diameter shafts.
Crawford adaptor: 9021671
Fits ConDoor, Hörmann, Novoferm and Alpha springs up to 50 mm diameter shafts.
Crawford adaptor: 9021671
Crawford adaptor for spring tension
Mounting flange for ITS radar
Cable for ITS radar 12 pol. 10m long
Complete lock system for garage door model Basic
Corner flashing - abs plastic, for door with inclination. For left and right side.
Consists of DW hose, 2 x hose connector, cable clamps, screws, pop rivets and cable ties
PVC profile for low threshold door, mounted on rail in dooropening
Ø11 mm, short, stainless steel
.jpg?v=122264992)
Crawford roller slider, incl. bolt, nut and roller holder.
For Crawford 1042. Original.
For Crawford 1042. Original.
.jpg?v=122264993)
Crawford intermediate hinge.
For Crawford 1042. Original.
For Crawford 1042. Original.
.jpg?v=122264980)
Spring breakage safety device, right. 35 mm axle, 152 mm spring. Original