For door with 5/4" shaft.
Consists of DW hose, 2 x hose connector, 2 x lock ring for 5/4" shaft, cable clamps, screws, pop rivets and cable ties
In stock, 27 pcs., 1 day(s)
For door with 1" shaft.
Consists of DW hose, 2 x hose connector, 2 x lock ring for 1" shaft, cable clamps, screws, pop rivets and cable ties
In stock, 194 pcs., 1 day(s)
For LS1 light control unit, 12 V /. Print for LS1 lamp control. 2 outputs, max load 12V / 20VA. DIP for selecting function
In stock, 2 pcs., 1 day(s)
Fitted in control unit cover. Communication print between lamp control and EHLDC
In stock, 21 pcs., 1 day(s)
3 non-energised outputs. Type UDM1. Door open signal, door closed and photo or error. Requires that 9-pole socket in control is available
In stock, 13 pcs., 1 day(s)
Support with snap for photocell.  LP drawing no. 010.02.106-04
In stock, 1269 pcs., 1 day(s)
In stock, 2510 pcs., 1 day(s)
In stock, 316 pcs., 1 day(s)
NOTE - The lock does not fit on 3 "rails and low lift rails .
In stock, 1 pcs., 1 day(s)
Communication cable for lamp control with socket and plug.
For LS1 light control unit.
In stock, 6 pcs., 1 day(s)
Type LS1, complete with two outlets. Lamp control for EHLDB and EHLDC control. Max load 12V / 20VA. DIP for selecting function. Including wall bracket and communication cable. For use with EHLDC, communication prints must be installed in the EHLDC control cover
In stock, 14 pcs., 1 day(s)
Incl. PCB for EHC cover. LS1 lamp control. 2 outputs, max load 12V / 20VA. DIP for selecting function
In stock, 1 pcs., 1 day(s)
Lid for control box for light control EHB
For LS1 light control.
In stock, 2 pcs., 1 day(s)
In stock, 6 pcs., 1 day(s)
Includes power supply, Ruko cylinder and fittings. The lock does not fit on 3 ”rails and low lift rails.
In stock, 1 pcs., 1 day(s)
Power supply cable for lightcurtain, for CEDES light curtain
In stock, 2 pcs., 1 day(s)
In stock, 99 pcs., 1 day(s)
In stock, 135 pcs., 1 day(s)