Cable between LPPRO control and NICE motor with force monitoring. Used for carwash control.
Thermostat type TH-H, 0 to 60 degrees, 10A, 250V - Heating element VARMEVASK8W not included.
Locked at 5 degrees for your rail.
LP-PRO electric drive for 3 x 400V with power monitoring, display and emergency stop, incl. BF7 motor with bracket. Excl. cable.
Accessories can be selected via the menus below.
LP-PRO electric drive for 3 x 400V with power monitoring, display and emergency stop, incl. BF1 motor with bracket. Excl. cable.
Accessories can be selected via the menus below.
LP-PRO electric drive for 3 x 400V with power monitoring, display and emergency stop, incl. BK1 motor with bracket. Excl. cable.
Accessories can be selected via the menus below.
LP-PRO electric drive for 3 x 230V with power monitoring, display and emergency stop, incl. BF7 motor with bracket. Excl. cable. Accessories can be selected via the menus below.
LP-PRO electric drive for 3 x 230V with power monitoring, display and emergency stop, incl. BF1 motor with bracket. Excl. cable.
Accessories can be selected via the menus below.
LP-PRO electric drive for 3 x 230V with power monitoring, display and emergency stop, incl. BK1 motor with bracket. Excl. cable.
Accessories can be selected via the menus below.
CPU processor print vers. 234 for LP-PRO
When the print has been replaced, a factory reset must be made.
The printed circuit board MUST be changed without voltage on the control!
Consists of DW hose, 2 x hose connector, cable clamps, screws, pop rivets and cable ties
If replacing a NICE control unit with a GFA control unit, the NICE motor can still be used with this kit. The kit includes a GFA control unit, 7 m power supply cable 3x230V, encoder, motor cable, DW40 and 1k2 resistor.
If the door is equipped with a lock and inductive sensor, the sensor must be replaced with another type.
Cannot be used with an inverter.
If replacing a NICE control unit with a GFA control unit, the NICE motor can still be used with this kit. The kit includes a GFA control unit, 7 m power supply cable 3x400V, encoder, motor cable, DW40 and 1k2 resistor.
If the door is equipped with a lock and inductive sensor, the sensor must be replaced with another type.
Cannot be used with an inverter.
If the NICE control unit is to be replaced with a GFA control unit, the NICE motor can still be used with this kit.
The kit includes a GFA control unit, 11 m power cable 3x230V, encoder, motor cable, DW40 and 1k2 resistor. If the door is equipped with a lock and inductive sensor, the sensor must be replaced with another type. Cannot be used with an inverter.
If the NICE control unit is to be replaced with a GFA control unit, the NICE motor can still be used with this kit.
The kit includes a GFA control unit, 11 m power cable 3x400V, encoder, motor cable, DW40 and 1k2 resistor. If the door is equipped with a lock and inductive sensor, the sensor must be replaced with another type. Cannot be used with an inverter.