L = 70 mm. For drip catch for carwash halls, type LEP
Up to 450 kg.
.JPG?v=108878356)
For door with 5/4" shaft.
Consists of DW hose, 2 x hose connector, 2 x lock ring for 5/4" shaft, cable clamps, screws, pop rivets and cable ties
Consists of DW hose, 2 x hose connector, 2 x lock ring for 5/4" shaft, cable clamps, screws, pop rivets and cable ties
For door with 1" shaft.
Consists of DW hose, 2 x hose connector, 2 x lock ring for 1" shaft, cable clamps, screws, pop rivets and cable ties
Consists of DW hose, 2 x hose connector, 2 x lock ring for 1" shaft, cable clamps, screws, pop rivets and cable ties
For LS1 light control unit, 12 V /. Print for LS1 lamp control. 2 outputs, max load 12V / 20VA. DIP for selecting function
Fitted in control unit cover. Communication print between lamp control and EHLDC
3 non-energised outputs. Type UDM1. Door open signal, door closed and photo or error. Requires that 9-pole socket in control is available
Support with snap for photocell. LP drawing no. 010.02.106-04
10 x 30 mm, for installation of pos.
Magnetswitch for building passdoor with magnet.
NOTE - The lock does not fit on 3 "rails and low lift rails .
Communication cable for lamp control with socket and plug.
For LS1 light control unit.
For LS1 light control unit.
Type LS1, complete with two outlets. Lamp control for EHLDB and EHLDC control. Max load 12V / 20VA. DIP for selecting function. Including wall bracket and communication cable. For use with EHLDC, communication prints must be installed in the EHLDC control cover
Incl. PCB for EHC cover. LS1 lamp control. 2 outputs, max load 12V / 20VA. DIP for selecting function
.jpg?v=120373499)
Lid for control box for light control EHB
For LS1 light control.
For LS1 light control.
Does not fit on 3 ”rails and low lift rails.
.jpg?v=108856415)
Includes power supply, Ruko cylinder and fittings. The lock does not fit on 3 ”rails and low lift rails.
.jpg?v=111896232)
Stainless steel.
L = 500 mm. 3,0 x 5,0 MM
.jpg?v=108878227)
With 20 m cable to EHLDC. Positioning box with 20 meter cable for 1" solid shaft for EHLDC control
With 10 m cable to EHLDC. Positioning box with 10 meter cable for 1" solid shaft for EHLDC control
.jpg?v=108878225)
With 7 m cable to EHLDC. Positioning box with 7 meter cable for 1" solid shaft for EHLDC control
.jpg?v=108878224)
With 4 m cable to EHLDC. Positioning box with 4 meter cable for 1" solid shaft for EHLDC control
.JPG?v=108878221)
With 20 m cable to EHLDC. Positioning box with 20 meter cable for 1" tube shaft for EHLDC control
.JPG?v=108878219)
With 10 m cable to EHLDC. Positioning box with 10 meter cable for 1" tube shaft for EHLDC control
.JPG?v=108878214)
With 7 m cable to EHLDC. Positioning box with 7 meter cable for 1" tube shaft for EHLDC control