GSM receiver module for up to max 1000 users, type: M200 (4G)
By using the Motorline GSM module, you can operate your gate, barrier, or sectional door from anywhere in the world via your phone using caller ID. When a user calls the GSM module, the user’s number is recognized, and the gate, door, or barrier opens.
It can also be operated via Bluetooth and SMS.
By using the Motorline GSM module, you can operate your gate, barrier, or sectional door from anywhere in the world via your phone using caller ID. When a user calls the GSM module, the user’s number is recognized, and the gate, door, or barrier opens.
It can also be operated via Bluetooth and SMS.
Slack cable switch for bottom hinge, Condoor. Up to 450 kg.
4-channel 433mhz handheld transmitter for LD971 (GFA), incl. battery, ex. wall bracket.
Wall bracket for RADSLD971-4K
.jpg?v=123263082)
5-pin, 16A CEE plug for mains supply (3N~400Vac) on 0.7 meter cable with gland and connection terminal for controls (types: TS959, TS970 and LD971).
.jpg?v=123263080)
4-pin, 16A CEE plug for mains supply (3~230Vac) on 0.7 meter cable with gland and connection terminal for controls (types: TS959, TS970 and LD971).
.jpg?v=123263079)
3-pin, 16A CEE plug for mains supply (1N~230Vac) on 0.7 meter cable with gland and connection terminal for controls (types: TS959, TS970 and LD971).
Control cover for LD971, with Lindab logo.
The print can be used for both digital and mechanical end stops.
Has a built-in 434 MHz radio receiver.
Has a built-in receiver for wireless edge protection, door contact (requires WSD module).
Up-Stop-Down buttons in lid.
Parameter adjustment with digital display.
2 programmable potential-free relay outputs - e.g. for traffic lights.
Automatic selection of edge protection (optical, 8k2 electrical sensor strip or DW contact 1k2 with test)
Auto close, half open, ventilation open.
Possibility of automatic wire slack compensation or self-adjustment of the closing position when changing the floor height.
Input terminals for pull switch, photocells, edge protection, etc.
Control for more advanced solution than TS970.
Has a built-in 434 MHz radio receiver.
Has a built-in receiver for wireless edge protection, door contact (requires WSD module).
Up-Stop-Down buttons in lid.
Parameter adjustment with digital display.
2 programmable potential-free relay outputs - e.g. for traffic lights.
Automatic selection of edge protection (optical, 8k2 electrical sensor strip or DW contact 1k2 with test)
Auto close, half open, ventilation open.
Possibility of automatic wire slack compensation or self-adjustment of the closing position when changing the floor height.
Input terminals for pull switch, photocells, edge protection, etc.
Control for more advanced solution than TS970.
_(2).jpg?v=124456502)
Universal, 0.5 / 0.5 m cable. Transmitter and receiver
.jpg?v=124428837)
Universal, 6.5m / 0.5 m cable. Transmitter and receiver.
Emergency stop for LD971/LD971V
Rotary switch 1/0 for LD971/LD971V
The GFA stick provides wireless access via Bluetooth 4.0 to GFA controllers (TS959, TS970, LD971).
Read the following data:
General: Serial number, software version, temperature.
Drive: Serial number, type, article number.
Settings: Operating mode, automatic closing, etc.
Errors: Last 6 errors (with error guide).
Log: Last 128 actions (open/close, stop, etc.).
Reset: Last factory reset.
Read the following data:
General: Serial number, software version, temperature.
Drive: Serial number, type, article number.
Settings: Operating mode, automatic closing, etc.
Errors: Last 6 errors (with error guide).
Log: Last 128 actions (open/close, stop, etc.).
Reset: Last factory reset.
Push-button box IP65, GFA.
For GFA system cable
Remember the system cable!
For GFA system cable
Remember the system cable!
_(2).jpg?v=123617830)
GFA system cable for ex. Button box, Length 3m
GFA system cable for ex. Button box, Length 10m
Water-resistant cover, For GFA WDS box
Wireless door module WSD for 971
Z-bracket for securing spiral cable. Supplied with bend protection and nut (M16)