Universal, 0.5 / 0.5 m cable. Transmitter and receiver

Universal, 6.5m / 0.5 m cable. Transmitter and receiver

The print can be used for both digital and mechanical end stops.
Has a built-in 434 MHz radio receiver.
Has a built-in receiver for wireless edge protection, door contact (requires WSD module).
Up-Stop-Down buttons in lid.
Parameter adjustment with digital display.
2 programmable potential-free relay outputs - e.g. for traffic lights.
Automatic selection of edge protection (optical, 8k2 electrical sensor strip or DW contact 1k2 with test)
Auto close, half open, ventilation open.
Possibility of automatic wire slack compensation or self-adjustment of the closing position when changing the floor height.
Input terminals for pull switch, photocells, edge protection, etc.
Control for more advanced solution than TS970.

GFA motor with release clutch. 90Nm, 24 RPM,
suitable for 1" shaft, and including key for hollow shaft. 3x230/400V IP65.

GFA chain release motor. 90Nm, 24 RPM, suitable for 1" shaft, and including key for hollow shaft.
3x230/400V IP65.
4 meter chains are included as standard.

GFA motor with release clutch. 90Nm, 30 RPM, suitable for 1" shaft, and including key for hollow shaft.
3x230/400V IP65.

GFA motor with release clutch. 90Nm, 20 RPM, suitable for 1" shaft, and including key for hollow shaft.
3x230/400V IP65.

GFA chain release motor. 90Nm, 20 RPM, suitable for 1" shaft, and including key for hollow shaft.
3x230/400V IP65.
4 meter chains are included as standard.

GFA chain release motor. 90Nm, 21 RPM, suitable for 5/4" shaft, and including key for hollow shaft.
3x230/400V IP65.
4 meter chains are included as standard.

GFA chain release motor with frequency converter. 80Nm, 60 RPM, suitable for 1" shaft, and including key for hollow shaft.
1x230V IP65.

GFA chain release motor with frequency converter. 140Nm, 80 RPM, suitable for 1" shaft, and including key for hollow shaft.
3x230/400V HSI IP65.
4 meter chains are included as standard.

Cord for disengagement and chain connection.
Black 2mm PP cross-braided with core.
One roll = 220 meters

Chain for GFA chain drive, rolls of 50m

Chain assembler for GFA

Packs of 10 pcs.

Motor console for GFA 8.60FOK.

Supplement to BSLMOCOBE3

Emergency stop for LD971/LD971V

Rotary switch 1/0 for LD971/LD971V

3-pin, 16A CEE plug for mains supply (1N~230Vac) on 0.7 meter cable with gland and connection terminal for controls (types: TS959, TS970 and LD971).

4-pin, 16A CEE plug for mains supply (3~230Vac) on 0.7 meter cable with gland and connection terminal for controls (types: TS959, TS970 and LD971).

5-pin, 16A CEE plug for mains supply (3N~400Vac) on 0.7 meter cable with gland and connection terminal for controls (types: TS959, TS970 and LD971).

GFA motor cable 5 meters for LD971.
Type DES, electronic limit switch.

5 pcs per colli

GFA motor cable 7 meters for LD971.
Type DES, electronic limit switch.

5 pcs per colli

GFA motor cable 11 meters for LD971.
Type DES, electronic limit switch.

5 pcs per colli

GFA motor cable 15 meters for LD971.
Type DES, electronic limit switch.

5 pcs per colli

GFA motor cable 25 meters for LD971.
Type DES, electronic limit switch.

5 pcs per colli

Motor cable GFA 8.60FOK/LD971, 5 m.
Including gland and plug.

5 pcs per colli

Motor cable GFA 8.60FOK/LD971, 7 m.
Including gland and plug.

5 pcs per colli

Motor cable GFA 8.60FOK/LD971, 11 m.
Including gland and plug.

5 pcs per colli

DW on print, incl. 200 mm tube

Cord kit with a length of 2x 7 meters with a red and a green handle.
Only suitable for motor : GEMOGFA8.60FOK