Support for photocell
Item number: PLKLFOTO
Supplier item number 088036
Support with snap for photocell.  LP drawing no. 010.02.106-04
Configure
Magnetic switch for wicket door
Item number: MAGSENN511M148
Supplier item number 088188
Magnetswitch for building passdoor with magnet.
Configure
Step50 electrical lock
Item number: LSSTEP50
Supplier item number 055340
NOTE - The lock does not fit on 3 "rails and low lift rails .
Configure
Communication cable 1 m
Item number: LAMPESTYLDBKAB
Supplier item number 088503
Communication cable for lamp control with socket and plug.
For LS1 light control unit.
Configure
Light control unit for EHB and EHC
Item number: LAMPESTYLDB12K
Supplier item number 082151
Type LS1, complete with two outlets. Lamp control for EHLDB and EHLDC control. Max load 12V / 20VA. DIP for selecting function. Including wall bracket and communication cable. For use with EHLDC, communication prints must be installed in the EHLDC control cover
Configure
Cover for light control unit
Item number: LAMPEKLJE10
Supplier item number 088502
Lid for control box for light control EHB
For LS1 light control.
Configure
Inductive tracker, M12, PNP
Item number: KONINDM12
Supplier item number 088214
For barrel bolt lock.
Configure
Release clutch Becker motor
Item number: FRIKOBBECK
Supplier item number 088308
For gear with steel hollow shaft. Release gear for Becker motor with brake.

Limited quantity. Sold while stock lasts.

Configure
Heated pad for gear, 400 V, 40 W
Item number: VAPUBECKBF40007
Supplier item number 082104
Electrically heated pad for motor 400V/40 watt, with 7 meter cable and thermostat.  LS: 96-K-A-620-04
Configure
Heated pad for gear, 1 x 230 V, 40
Item number: VAPUBECKBF23007
Supplier item number 082106
Electrically heated pad for motor 230V/40 watt, with 7 meter cable and thermostat.  LS:93-K-A-620-04
Configure
Cover for limit switch housing
Item number: LGBECKBK
Supplier item number 088326L
Becker. Cap for end stop housing for Becker motors without brake
Configure
Screwed connection
Item number: FORSKBECK101
Supplier item number 088402
For Becker motor. Cable srew connection that fits the end stop housing on all Becker motors
Configure
Heating elements PTC, 230 V, 15 W
Item number: VASTYEHB15W
Supplier item number 082199
For Lindab car wash control unit. Fits both EHLDB and EHLDC carwash controls
Configure
Screw for control unit cover
Item number: SKRKSLGVASK
Supplier item number 080036
EHC car wash control unit. Also fits the latest EHLDB carwash controls
Configure
EHLDB basic PCB 3 x 230 v
Item number: PRIEHB323
Supplier item number 082162
EHLDB basic PCB (type EHB), 3x230 Volt.
Configure
HSI motorcable, 11m
Item number: KABHSI11M
Supplier item number 081205
HSI motorcable, 11m
Configure
Electrical operation for HSI
Item number: HSIELDRIFT
Supplier item number 081200
Electrical operation for HSI excl. safety edge, 1" shaft, 1 x 230V, 140 rpm
Configure
Encoder for GEMOHSI60140
Item number: ENCODERHSI
Supplier item number 081209
Encoder for HDFNI gearmotor, GEMOHSI60140
Configure
PCB in lid for D-PRO
Item number: PRIDPROLÅG
Supplier item number 081210
PCB in lid for D-PRO
Configure
D-PRO control unit for 1 x 230V HSI
Item number: STYDPRO1X230
Supplier item number 081204
Discontinued model
Use : STYDPRO1X230-2

D-PRO control unit for 1 x 230V, incl. emergency stop, supply cable. NICE D-PRO automatic control for motor with inverter. Control is supplied with emergency stop and has tightness class IP65. Supply voltage must be 1 x 230V.
Set for HSI.
Configure
Light curtain CEDES OSE and PNP
Item number: LYSGCEDES25
Supplier item number 082993
Max. protection hight 2500 mm. Up to 10m in door width.
Supplied with power cable, 6-pole, length 5000mm.
Connection cable up to 10 meters, 4-pole, 3 pcs..
Additionally, various mounting screws, brackets, etc.
Configure
Kostal encoder for motor
Item number: ENKODERK
Supplier item number 089219
Kostal encoder for motor. Fits Becker, NICE, MFZ and others.
Configure
Emergency operation drive for gemobkxn motor
Item number: DREVKAEDENICE
Supplier item number 081080
Emergency operation drive for gemobkxn motor
Configure
D-PRO control unit for 1 x 230V
Item number: STYDPRO1X230-2
Supplier item number 081202
D-PRO HSI 1X230 control, set for HSI.
Controller comes with emergency stop and has IP65 protection class
Supply voltage must be 1 x 230V.
(Note: Supply cable is permanently mounted on the inverter)
Configure
Magnet for magnetic contact
Item number: MAGM148
Supplier item number 088188M
Magnet for magnetic contact
Configure
Light curtain CEDES OSE and PNP, 2000mm
Item number: LYSGCEDES20
Supplier item number 082991
Max. protection hight 2000 mm. Up to 10m in door width.
Supplied with power cable, 6-pole, length 5000mm.
Connection cable up to 10 meters, 4-pole, 3 pcs..
Additionally, various mounting screws, brackets, etc.
Configure


What do we offer?
As a dealer in the door industry, you can purchase all your spare parts in this online store. We provide a wide range of products, covering many different manufacturers and types, delivering to customers all over Europe. We want to be your preferred supplier of spare parts, and this is why we closely monitor the market on an ongoing basis, keeping up to date with new accessories, trend and spare parts, in close collaboration with our customers.
+ 45 62 62 25 79info@lindabdoorshop.com