Crawford operator CDM9 complete, incl. Control 950A
The print can be used for both digital and mechanical end stops.
Has a built-in 434 MHz radio receiver.
Has a built-in receiver for wireless edge protection, door contact (requires WSD module).
IP54 - with CEE connector / IP65 with supply voltage directly connected.
Up-Stop-Down buttons in lid.
Parameter adjustment with digital display.
2 programmable potential-free relay outputs - e.g. for traffic lights.
Automatic selection of edge protection (optical, 8k2 electrical sensor strip or DW contact 1k2 with test)
Auto close, half open, ventilation open.
Possibility of automatic wire slack compensation or self-adjustment of the closing position when changing the floor height.
Input terminals for pull switch, photocells, edge protection, etc.
Control for more advanced solution than TS970.
Has a built-in 434 MHz radio receiver.
Has a built-in receiver for wireless edge protection, door contact (requires WSD module).
IP54 - with CEE connector / IP65 with supply voltage directly connected.
Up-Stop-Down buttons in lid.
Parameter adjustment with digital display.
2 programmable potential-free relay outputs - e.g. for traffic lights.
Automatic selection of edge protection (optical, 8k2 electrical sensor strip or DW contact 1k2 with test)
Auto close, half open, ventilation open.
Possibility of automatic wire slack compensation or self-adjustment of the closing position when changing the floor height.
Input terminals for pull switch, photocells, edge protection, etc.
Control for more advanced solution than TS970.