Bottomrubber and plugs

Bottom sealing, type LD, EPDM

Item number: TETBU9587

Supplier item number 055485

Bottom sealing, type LD, EPDM 70 - LDI/LDC/LDP

5846 in stock, 1 day(s) - for expected shipment

Configure

Bottom sealing, type LD, EPDM 50M

Item number: TETBU9587M50

Supplier item number 055487

Bottom sealing, type LD, EPDM. Type 9587, 50 meter

19 in stock, 1 day(s) - for expected shipment

Configure

Plug for bottom seal, deged

Item number: TETPRBULP3

Supplier item number 055486

Plug for bottom seal, new model (TETBU9587). Butyl tape should not be used.

4146 in stock, 1 day(s) - for expected shipment

Configure

Plug for bottom sealing

Item number: TETPRBULP

Supplier item number 055508

Plug for bottomrubber with round loch, can also be used for Crawford E65 bottomrubber (rubber)

529 in stock, 1 day(s) - for expected shipment

Configure

Plug for bottom sealing

Item number: TETPRBULP2

Supplier item number 055492

Plug with edges. Sealing not included (TETBUTYL45S)

1317 in stock, 1 day(s) - for expected shipment

Configure

Plug for bottom sealing, edged

Item number: TETPRBULP2K

Supplier item number 055492K

Complete including sealing 055945 (TETBUTYL45)

1137 in stock, 1 day(s) - for expected shipment

Configure

Bottom sealing for low bottom piece

Item number: TETBU1035L

Supplier item number 055215

35 m/roll.

150 in stock, 1 day(s) - for expected shipment

Configure

Bottom sealing, type LD, 100 mm, EP

Item number: TETBU844808

Supplier item number 055560

Bottom seal type 8448 with double chamber (EPDM), 8100 mm.

22 in stock, 1 day(s) - for expected shipment

Configure

Bottom sealing for ET46, panorama

Item number: TETBUF1037

Supplier item number 055207

Square cut rubber, with flat-edged grip.

48 in stock, 1 day(s) - for expected shipment

Configure

Low bottom sealing, black, EPDM, gr

Item number: 9055205

Supplier item number 055205

Internal hose diameter 14 mm.

626 in stock, 1 day(s) - for expected shipment

Configure

Low bottom sealing, black, EPDM, gr

Item number: 9055205Q

Supplier item number 055205Q

Internal hose diameter 14 mm. 30 meter

20 in stock, 1 day(s) - for expected shipment

Configure

High bottom sealing

Item number: 9055212

Supplier item number 055212

For Torxforce rails. Bottom seal with two round grips. Can be used for optosensor

4 in stock, 1 day(s) - for expected shipment

Configure

Rubber profile for sealing at floor

Item number: TETGULV

Supplier item number 121065

78 x 13 mm. Attached with E.g. glue and primer from Danalim

50 in stock, 1 day(s) - for expected shipment

Configure

Plug for bottom sealing, conic

Item number: 9055517

Supplier item number 055517

18 x 22 x 25 mm, Ø18 in narrow end.

394 in stock, 1 day(s) - for expected shipment

Configure

Plug without hole

Item number: TETPRBU1

Supplier item number 055499

Diameter 16 mm, plug for hose, without hole, (rubber), for DW.

195 in stock, 1 day(s) - for expected shipment

Configure

Plug for bottom sealing, conic

Item number: 9055501

Supplier item number 055501

12 x 16 x 20 mm, Ø12 in narrow end.

200 in stock, 1 day(s) - for expected shipment

Configure

Plug with hole

Item number: TETPRBU2

Supplier item number 055518

Diameter 16 mm, plug for hose, with hole, (rubber), for DW.

Temporarily sold out

Configure

Plug for bottom sealing (foam rubbe

Item number: 9055502

Supplier item number 055502

Ø45 mm. Plug for high bottom seal, black foam rubber (neoprene cell rubber), dimensions: Ø45 mm x 40 mm

647 in stock, 1 day(s) - for expected shipment

Configure