Type Lenze, 28 W.

Gear 40:1. Angle gear for fire doors. Exchange 40: 1, Type 6 LJ

IEC standard motor for fire control. Motor, 0.37kW, 1400 rpm, with small B14 mounting flange

Including bearing for shaft, Ø70 mm. Wire wheels for spring tensioner on BS60 doors, Ø 70 mm, including bearing

Type 560.

Automatic fire door closing system, ABDL 4000, version 2, multiprotocol.
The new version of the well-known ABDL central unit is a multi-protocol unit, which covers the previous variants. The firmware is set with a rotary knob in the unit. In addition, it has been increased from 300mA to 500mA.

Bracket for pulley Dictator 3700, for Meverin firedoors.

Wall bracket for Dictator 3700, for Meverin firedoors.

Bracket for door for Dictator 3700, for Meverin firedoors.

Distance washer/horse shoe in 1 mm. Used as a blocking between wall and running rail on fire sliding door.

Semi-automatic motor that automatically opens the fire door and holds it in the open position.
In case of closing/fire/power failure, the motor and the door's weights are released and ensure that the door closes.
Motor is equipped with integrated brake, so closing speed can be controlled from start to finish.
Together with the motor, suspension brackets, pulley and brackets for the door are supplied, all brackets suitable for the Ball-tik rail.

The following must be ordered separately:
Control: E8
Belt drive: 20 mm toothed belt
(if motor is to be mounted on e.g. (e.g. fire door from Meverin, bracket must be ordered separately)

Technical data:
Type: Dictamat 3700-21
*Motor force: 300N
Opening speed adjustable: 0.10 - 0.25 m/sec
Closing speed adjustable: 0.08 - 0.2 m/sec
Pull: belt pull
Supply from Control: 24 VDC
IP class: IP 44
Motor weight: 12 kg
Integrated encoder: Yes
Door weight (requires the door to run light) up to: 700 kg
Maximum door width: 7000 mm
Recommended openings per day: 100
*for larger doors, control can be fitted with gear to increase force on motor to 500 N

Control system for fire door type E8

Toothed belt for Dictamat control
20 mm toothed belt for Dictamat control, made of PU and reinforced inside with steel wire.

Technical data:
Type: 20 mm toothed belt
Material: PU
Reinforcement: steel wire
Temperature resistant: -30 - + 80 Celsius
Resistant to: UV, Ozone and Oil
Strength: Toothed belt HTD 8m, width 20 mm = 2680 N

Toothed belt ordered costum made: port width x 2 + 2 meter

Type SD-1 og SD-2

Steel anchor TA M8 of electro zinc plated steel. For fixing e.g. systems and machines in non-reinforced concrete.

Steel anchor TA M6 of electro zinc plated steel. For fixing e.g. systems and machines in non-reinforced concrete.

Brake for fire sliding door type SD, VTK Kalipe.

Bottom guide, fire sliding door, SD, Fire class EI2 60

Floorstop, fire sliding door, SD, Fire class EI2 60

Pulley, fire sliding door type SD, Bracket with pulley, counterweight

Magnet til brandskydeport type SD, Elektromagnet type ELM-K.

Holder, fire sliding door type SD, Holder for magnet, incl. bracket

Roller, fire sliding door type SD, Fire class EI2 60

Fireseal, fire sliding door type SD 90 mm fireseal

Fireseal, fire sliding door type SD 40 mm fireseal

Bottom guide, fire sliding door, SD. Fire class EI2 120

Floorstop, fire sliding door, SD. Fire class EI2 120

Thermal fire detector in IP67 housing.
With LED indicator.
Supply voltage 12-30 VDC.
Current consumption: 0mA - (not active) 6-40mA (±400 Ohm) (in case of alarm),
Fits e.g. ABDL4000 (Remember 2K2 End resistor).
Working temperature -40°C (Min), +25°C (Norm), +50°C (Max). Dimensions: ø100 x 75mm. 3 end caps.
Used in aggressive environments - e.g. biogas plants, stable environments and areas where everything is washed VERY thoroughly.
Remote sensor supply 2 VDC / 10mA. ATEX classification: II 3 G Ex ic IIC T5 Gc, II 3 D Ex ic IIIC T100°C Dc -40°C ≤ Ta ≤ 50°C / EN 60079-0:2009, EN 60079-11:2012. Sensor for 72°C, 87°C and 117°C available.