_(2)_(3).png?v=124054055)
Crawford 1042, steel, fixed dimension, Outside anthracite 7016/inside Off white 9002.
Original.
Original.
_(2)_(3).png?v=124054072)
Crawford 1042, steel, fixed dimension, Outside silvermetallic 9006/inside Off white 9002.
Original.
Original.
.png?v=124054053)
Crawford 1042, complete bottom section, Outside anthracite 7016/inside off white 9002
Original
Original
REMEMBER, to indicate in the comment field, if the sections should be incl. handles, as well as which side - seen from inside!
.png?v=124054063)
Crawford 1042, complete bottom section, Outside silvermetallic 9006/inside off white 9002
Original
Original
REMEMBER, to indicate in the comment field, if the sections should be incl. handles, as well as which side - seen from inside!
Crawford 1042, complete intermediate section, Outside anthracite 7016/inside off white 9002
Original
Original
Crawford 1042, complete intermediate section, Outside silvermetallic 9006/inside off white 9002
Original
Original
_(2).png?v=124054054)
Crawford 1042, complete top section, Outside anthracite 7016/inside off white 9002
Original
Original
_(2).png?v=124054070)
Crawford 1042, complete top section, Outside silvermetallic 9006/inside off white 9002
Original
Original
.jpg?v=120373502)
Control unit can be connected to 3x400V, 3x230V or 1x230V.
Supplied with short power cable for 3x400V.
Up - Stop - Down buttons in lid.
Supplied with short power cable for 3x400V.
Up - Stop - Down buttons in lid.
Contactor for Dalmatic BA2 control.
Fits all model years.
Auxiliary contacts should be replaced together with this.
Fits all model years.
Auxiliary contacts should be replaced together with this.
Auxiliary contacts for BA2 control.
Fits item number KONTAKTORBA2.
Fits item number KONTAKTORBA2.
Side sealing strip for ramp type LS232M/233M/233NG.
Rubber strip for sealing ramps. Fits ramps with hinged and telescopic lip.
Rubber strip for sealing ramps. Fits ramps with hinged and telescopic lip.
LD971 control 1000mA, unit with integrated up-stop-down control for pulse or deadman operation.
Equipped with an integrated radio plug-in receiver (433MHz) and prepared for wireless safety edge protection (type: WSD).
1 x 230V CEE plugs, on a 0.7 meter cable included.
Compatible with GFA control – model TS971
Equipped with an integrated radio plug-in receiver (433MHz) and prepared for wireless safety edge protection (type: WSD).
1 x 230V CEE plugs, on a 0.7 meter cable included.
Compatible with GFA control – model TS971
LD971 control 1000mA, unit with integrated up-stop-down control for pulse or deadman operation.
Equipped with an integrated radio plug-in receiver (433MHz) and prepared for wireless safety edge protection (type: WSD).
3 x 230V CEE plugs, on a 0.7 meter cable included.
Compatible with GFA control – model TS971
Equipped with an integrated radio plug-in receiver (433MHz) and prepared for wireless safety edge protection (type: WSD).
3 x 230V CEE plugs, on a 0.7 meter cable included.
Compatible with GFA control – model TS971
LD971 control 1000mA, unit with integrated up-stop-down control for pulse or deadman operation.
Equipped with an integrated radio plug-in receiver (433MHz) and prepared for wireless safety edge protection (type: WSD).
3 x 400V CEE plugs, on a 0.7 meter cable included.
Compatible with GFA control – model TS971
Equipped with an integrated radio plug-in receiver (433MHz) and prepared for wireless safety edge protection (type: WSD).
3 x 400V CEE plugs, on a 0.7 meter cable included.
Compatible with GFA control – model TS971
Control unit LD971 1000mA, without power cable.
Used for 1x230V, 3x230V & 3x400V.
Compatible with GFA control – model TS971
Used for 1x230V, 3x230V & 3x400V.
Compatible with GFA control – model TS971
Control unit LD971 and chain motor. 140 Nm, 21 RPM. IP65 and for 5/4" shaft.
Includes wedges for hollow and solid shaft, DW, spiral cable, 7 m motor cable, supply cable 3x400V, and motor bracket.
4 meters of chain included as standard
Includes wedges for hollow and solid shaft, DW, spiral cable, 7 m motor cable, supply cable 3x400V, and motor bracket.
4 meters of chain included as standard
Control unit LD971 and chain motor. 140 Nm, 21 RPM. IP65 and for 5/4"" shaft.
Includes wedges for hollow and solid shaft, DW, spiral cable, 7 m motor cable, supply cable 3x230V, and motor bracket.
4 meters of chain included as standard
Includes wedges for hollow and solid shaft, DW, spiral cable, 7 m motor cable, supply cable 3x230V, and motor bracket.
4 meters of chain included as standard
.jpg?v=124139134)
Control unit LD971 and chain motor with frequency inverter. 80 Nm, 60 RPM. IP65 and for 1" shaft.
Includes wedges for hollow and solid shaft, DW, spiral cable, 7 m motor cable, supply cable 1x230V, and motor bracket.
Includes wedges for hollow and solid shaft, DW, spiral cable, 7 m motor cable, supply cable 1x230V, and motor bracket.
Control unit LD971 and chain motor with frequency inverter, 140 Nm, 80 RPM. IP65 and for 1" shaft.
Includes wedges for hollow and solid shaft, DW, spiral cable, 7 m motor cable, supply cable 1x230V, and motor bracket.
4 meters of chain included as standard.
Includes wedges for hollow and solid shaft, DW, spiral cable, 7 m motor cable, supply cable 1x230V, and motor bracket.
4 meters of chain included as standard.
GSM receiver module for up to max 1000 users, type: M200 (4G)
By using the Motorline GSM module, you can operate your gate, barrier, or sectional door from anywhere in the world via your phone using caller ID. When a user calls the GSM module, the user’s number is recognized, and the gate, door, or barrier opens.
It can also be operated via Bluetooth and SMS.
By using the Motorline GSM module, you can operate your gate, barrier, or sectional door from anywhere in the world via your phone using caller ID. When a user calls the GSM module, the user’s number is recognized, and the gate, door, or barrier opens.
It can also be operated via Bluetooth and SMS.
Fan for UPS in Dalmatic replacement air control (BA2)
Cable set for C60 UPS in Dalmatic replacement air control (BA2).
This ensures the fan runs continuously, which improves battery durability.
This ensures the fan runs continuously, which improves battery durability.
.jpg?v=124145127)
Cable set for C200 UPS in Dalmatic replacement air control (BA2).
This ensures the fan runs continuously, which improves battery durability.
This ensures the fan runs continuously, which improves battery durability.
Display with Up - Stop - Down buttons mounted on the front of the control unit.
The display is backward compatible with all Lindab Dalmatic BA2 control units.
The display is backward compatible with all Lindab Dalmatic BA2 control units.