LP-PRO electric drive for 3 x 230V with power monitoring, display and emergency stop, incl. BK1 motor with bracket. Excl. cable.
Accessories can be selected via the menus below.
Accessories can be selected via the menus below.
Foil for control cover V7E
CPU processor print vers. 234 for LP-PRO
When the print has been replaced, a factory reset must be made.
The printed circuit board MUST be changed without voltage on the control!
When the print has been replaced, a factory reset must be made.
The printed circuit board MUST be changed without voltage on the control!
Stainless wire and end terminal
Hjørneinddækning garageport med 15gr. 1stk H + 1stk V. Tilpasset 15graders taghældning.
.jpg?v=120377112)
Hjørneinddækning garageport med 25gr. 1stk H + 1stk V. Tilpasset 25graders taghældning.
Defus photocell with adjustable sense distance 0-5m.
Jumper red, 2,54mm, H = 14 mm
For LP-PRO
For LP-PRO
Crawford bottom roller carrier, left
Crawford bottom roller carrier, right
Crawford handle / base plate, For 542 incl. Logo
Crawford middle hinge, For 542, 75x70mm
Crawford operator CDM9 complete, incl. Control 950A.
Original.
Original.
Crawford roller bracket for side hinge, 11mm, short
Crawford roller, short, 2", 11mm, L = 115mm
Crawford side hinge 342/542, incl. Bracket
The print can be used for both digital and mechanical end stops.
Has a built-in 434 MHz radio receiver.
Has a built-in receiver for wireless edge protection, door contact (requires WSD module).
Up-Stop-Down buttons in lid.
Parameter adjustment with digital display.
2 programmable potential-free relay outputs - e.g. for traffic lights.
Automatic selection of edge protection (optical, 8k2 electrical sensor strip or DW contact 1k2 with test)
Auto close, half open, ventilation open.
Possibility of automatic wire slack compensation or self-adjustment of the closing position when changing the floor height.
Input terminals for pull switch, photocells, edge protection, etc.
Control for more advanced solution than TS970.
Has a built-in 434 MHz radio receiver.
Has a built-in receiver for wireless edge protection, door contact (requires WSD module).
Up-Stop-Down buttons in lid.
Parameter adjustment with digital display.
2 programmable potential-free relay outputs - e.g. for traffic lights.
Automatic selection of edge protection (optical, 8k2 electrical sensor strip or DW contact 1k2 with test)
Auto close, half open, ventilation open.
Possibility of automatic wire slack compensation or self-adjustment of the closing position when changing the floor height.
Input terminals for pull switch, photocells, edge protection, etc.
Control for more advanced solution than TS970.
Nice UDL2 control for Loading leveler with hinged lip.
In black box, type NG (IP65) with 2 buttons (up and return).
Box dimensions: 210 x 310 x 125 mm (WxHxD).
Control board is standard UDL2 (for hinged and sliding lip levelers). Voltage supply 3x400V AC, N, PE / 3x400V AC, PE / 3x230V AC, PE / 1x230V AC, PE. Max valve load: 24 VDC/0.83 Amp.Hydraulic pump max: 1.2KW
In black box, type NG (IP65) with 2 buttons (up and return).
Box dimensions: 210 x 310 x 125 mm (WxHxD).
Control board is standard UDL2 (for hinged and sliding lip levelers). Voltage supply 3x400V AC, N, PE / 3x400V AC, PE / 3x230V AC, PE / 1x230V AC, PE. Max valve load: 24 VDC/0.83 Amp.Hydraulic pump max: 1.2KW
Marantec RS300K control for Loading leveler with hinged lip.
In white box (IP65) with 2 buttons (up and return).
Box dimensions: 215 x 275 x 190 mm (WxHxD). Control board is standard RS300K but with special Loading software.
Power supply 3x400V AC, N, PE / 3x230V AC, PE. Internal power supply 24 VDC / 2.2Amp. Max valve load: 24 VDC/0.6 Amp. Hydraulic pump max: 2.2KW / 8A.
In white box (IP65) with 2 buttons (up and return).
Box dimensions: 215 x 275 x 190 mm (WxHxD). Control board is standard RS300K but with special Loading software.
Power supply 3x400V AC, N, PE / 3x230V AC, PE. Internal power supply 24 VDC / 2.2Amp. Max valve load: 24 VDC/0.6 Amp. Hydraulic pump max: 2.2KW / 8A.
Nice UDL2 control for Loading leveler with telescopic lip.
In black box, type NG (IP65) with 4 buttons (up, out, in and return).
Box dimensions: 210 x 310 x 125 mm (WxHxD).
Control board is standard UDL2 (for hinged and sliding lip levelers). Voltage supply 3x400V AC, N, PE / 3x400V AC, PE / 3x230V AC, PE / 1x230V AC, PE. Max valve load: 24 VDC/0.83 Amp.Hydraulic pump max: 1.2KW
In black box, type NG (IP65) with 4 buttons (up, out, in and return).
Box dimensions: 210 x 310 x 125 mm (WxHxD).
Control board is standard UDL2 (for hinged and sliding lip levelers). Voltage supply 3x400V AC, N, PE / 3x400V AC, PE / 3x230V AC, PE / 1x230V AC, PE. Max valve load: 24 VDC/0.83 Amp.Hydraulic pump max: 1.2KW
Marantec RS300V control for Loading leveler with telescopic lip.
In white box (IP65) with 4 buttons (up, out, in and return).
Box dimensions: 215 x 275 x 190 mm (WxHxD).
Control board is standard RS300K but with special Loading software. Power supply 3x400V AC, N, PE / 3x230V AC, PE. Internal power supply 24 VDC / 2.2Amp. Max valve load: 24 VDC/0.6 Amp. Hydraulic pump max: 2.2KW / 8A.
In white box (IP65) with 4 buttons (up, out, in and return).
Box dimensions: 215 x 275 x 190 mm (WxHxD).
Control board is standard RS300K but with special Loading software. Power supply 3x400V AC, N, PE / 3x230V AC, PE. Internal power supply 24 VDC / 2.2Amp. Max valve load: 24 VDC/0.6 Amp. Hydraulic pump max: 2.2KW / 8A.
Hydraulic power pack in plastic tank. 4.3cc/1.1kW/10L for Loading levelers type 232 150/180 kN (1 valve), Weight 13 Kg
Hydraulic power pack. 1.1kW/5L for Loading levelers type 233M/233NG (3 valve) complete with cables, Weight 16,1 Kg
Complete Sommer/Aperto GIGA Control controller for GLG high-speed door with frequency converter Edge protection: Photocells/Light curtain (OSE)/Electrical sensor list/DW. Cabinet: 350x200x150mm, IP54. Max motor 1.1kW
Loose Sommer GIGA Control control board for STYGLGHP
60N motor with built-in frequency converter for GLG high-speed door. 1 KW motor, 115 RPM
30N motor with built-in frequency converter for GLG High-speed door. 0.55 KW, 115RPM, Typical for small High-speed doors.
Loose control board for GEMOGLGFO30N and GEMOGLGFO60N
Pro Loop 2 detector for 1 loop with 2 relay outputs.
Mounting on standard DIN Rail.
Mounting on standard DIN Rail.