Angle plate. Reinforcement for console for spring break safety device (KONLE322BAS)
Adjustable, 20 pcs. Spring break safety device universal for 2" up to 6" springs, can be made adjustable by using an adjustable bracket, without adjustable bracket the distance from bracket edge to bearing center is 86mm, galvanized steel
Size 2, right + left.
(Used when door weight > 350 kg) Galvanised steel
(Used when door weight > 350 kg) Galvanised steel
Size 1, right + left.
Galvanised steel
Galvanised steel
Sleeve for reduction from 17 mm to 10 mm.
Ø10 / Ø17 mm.
Ø10 / Ø17 mm.
For Ø140 m, incl. pulley.
Turning wheel system for springs on console, Vertical lift. Universal for right and left side. For vertical lift as well as highlift where the headroom is >= 2520 mm
Turning wheel system for springs on console, High lift. Right/Left. For headroom >= 1850 mm and < 2520 mm
Ø100 mm, cast iron.
The item has been replaced by: VEHJF554100
The item has been replaced by: VEHJF554100
.JPG?v=108878553)
Ø140 mm, Galvanised steel 30 pcs. per box
.JPG?v=114479837)
4" (100 mm) ø10 mm. Galvanised steel 50 pcs. per box
.JPG?v=108878550)
Ø80 mm, Galvanised steel 80 pcs. per box
OH = 200 mm, for roof pitch, right.
OH = 200 mm, for roof pitch, left.
Ø50 mm, with SKF bearing. Wirewheel, with SKF bearing, (Colson cord washer) type WHSK050. Inner diameter 50 mm and outer diameter 60 mm, bearing hole diameter 9 mm. Max. wire thickness 4.0 mm, max. load 130 kg per piece. Galvanized steel
Ø77 mm. Wire wheel 3", made of 1.2 mm galvanized steel, inside diameter is 64 mm and outer diameter is 77 mm, bearing hole for shaft / screw is 10 mm. Max. Door weight = 75 kg
140 x 42 x 4 mm. Retaining plate for C-profile / bearing bracket
Large wall console for internally located motor Galvanised steel
.jpg?v=109347432)
.jpg?v=109347427)
H = 76 152 mm, type USA-8. Universal bearing plate in 4.4 mm galvanized steel without bearing. Adjustable from 76 mm to 152 mm