Standard bag, E-operator, EHB & EHC, 1" shaft
Item number: STDPOSEEHB
Supplier item number 082098
For door with 1" shaft.
Consists of DW hose, 2 x hose connector, 2 x lock ring for 1" shaft, cable clamps, screws, pop rivets and cable ties
60 in stock, 1 day(s) - for expected shipment
Configure
Light control unit PCB
Item number: PRILBJE20
Supplier item number 088577
For LS1 light control unit, 12 V /. Print for LS1 lamp control. 2 outputs, max load 12V / 20VA. DIP for selecting function
Out of stock, 10 day(s) - for expected shipment
Configure
PCB for light control unit for EHC
Item number: PRILAMPESTYEHC
Supplier item number 080085
Fitted in control unit cover. Communication print between lamp control and EHLDC
14 in stock, 1 day(s) - for expected shipment
Configure
Outlet module for EHC and EHB contr
Item number: PRIEHB3UDG
Supplier item number 082146
3 non-energised outputs. Type UDM1. Door open signal, door closed and photo or error. Requires that 9-pole socket in control is available
3 in stock, 1 day(s) - for expected shipment
Configure
Support for photocell
Item number: PLKLFOTO
Supplier item number 088036
Support with snap for photocell.  LP drawing no. 010.02.106-04
1356 in stock, 1 day(s) - for expected shipment
Configure
Tight-fitting bolt M8
Item number: PASBOLTM830
Supplier item number 080083
10 x 30 mm, for installation of pos.
2509 in stock, 1 day(s) - for expected shipment
Configure
Magnetic switch for wicket door
Item number: MAGSENN511M148
Supplier item number 088188
Magnetswitch for building passdoor with magnet.
436 in stock, 1 day(s) - for expected shipment
Configure
Step50 electrical lock
Item number: LSSTEP50
Supplier item number 055340
NOTE - The lock does not fit on 3 "rails and low lift rails .
1 in stock, 1 day(s) - for expected shipment
Configure
Communication cable 1 m
Item number: LAMPESTYLDBKAB
Supplier item number 088503
Communication cable for lamp control with socket and plug.
For LS1 light control unit.
6 in stock, 1 day(s) - for expected shipment
Configure
Light control unit for EHB and EHC
Item number: LAMPESTYLDB12K
Supplier item number 082151
Type LS1, complete with two outlets. Lamp control for EHLDB and EHLDC control. Max load 12V / 20VA. DIP for selecting function. Including wall bracket and communication cable. For use with EHLDC, communication prints must be installed in the EHLDC control cover
5 in stock, 1 day(s) - for expected shipment
Configure
EHC light control unit 1 x 230 V
Item number: LAMPESTYEHC230K
Supplier item number 080120
Incl. PCB for EHC cover. LS1 lamp control. 2 outputs, max load 12V / 20VA. DIP for selecting function
5 in stock, 1 day(s) - for expected shipment
Configure
Wall bracket for LA1 light
Item number: LAMPELPSTPS101
Supplier item number 082096
Tiltable.
65 in stock, 1 day(s) - for expected shipment
Configure
Cover for light control unit
Item number: LAMPEKLJE10
Supplier item number 088502
Lid for control box for light control EHB
For LS1 light control.
2 in stock, 1 day(s) - for expected shipment
Configure
Warning light LED red and green
Item number: LAMPE230LEDRG
Supplier item number 082402
230 V 3 W E14 LED IP65.
14 in stock, 1 day(s) - for expected shipment
Configure
Warning light LED red
Item number: LAMPE230LEDR
Supplier item number 082401
230 V 3 W E14 LED IP65.
24 in stock, 1 day(s) - for expected shipment
Configure
Warning light LED green
Item number: LAMPE230LEDG
Supplier item number 082400
230 V 3 W E14 LED IP65.
14 in stock, 1 day(s) - for expected shipment
Configure
Inductive tracker, M12, PNP
Item number: KONINDM12
Supplier item number 088214
For barrel bolt lock.
500 in stock, 1 day(s) - for expected shipment
Configure
Photocell transmitter with snap, ha
Item number: FOTSMT3000S25HF
Supplier item number 082092
With 25 m cable.
2 in stock, 1 day(s) - for expected shipment
Configure
Photocell transmitter with snap
Item number: FOTSMT3000S25
Supplier item number 082109
Photocell transmitter, snap with 25 meter cable.  SMT 3000HC S30 25  ICS- 0466163503
28 in stock, 1 day(s) - for expected shipment
Configure
Photocell transmitter with snap
Item number: FOTSMT3000S15
Supplier item number 082132
Photocell transmitter, snap with 15 meter cable.  SMT 3000HC S30 15  ICS- 0466163502
300 in stock, 1 day(s) - for expected shipment
Configure
Photocell receiver with snap
Item number: FOTSMR3206S05
Supplier item number 082131
Photocell receiver, snap with 5 meter cabel.  SMR 3206 S30 5  ICS- 0466164202
335 in stock, 1 day(s) - for expected shipment
Configure
Photocell with snap, complete set
Item number: FOTSM0525S
Supplier item number 083002
With 5/25 m cable. Photocell system with snap. Complete set with 25 m cable incl. brackets and screws
31 in stock, 1 day(s) - for expected shipment
Configure
Photocell with snap, complete set
Item number: FOTSM0515S
Supplier item number 083001
With 5/15 m cable. Photocell system with snap. Complete set with 15 m cable incl. brackets and screws
149 in stock, 1 day(s) - for expected shipment
Configure
Mounting bracket for STEP50 lock
Item number: BSLMONTSTEP50
Supplier item number 055341
Does not fit on 3 ”rails and low lift rails.
3 in stock, 1 day(s) - for expected shipment
Configure
Step50 electrical lock, complete
Item number: 9055340K
Supplier item number 055340K
Includes power supply, Ruko cylinder and fittings. The lock does not fit on 3 ”rails and low lift rails.
1 in stock, 1 day(s) - for expected shipment
Configure
Angle duct for spiral cable
Item number: LEDNVINKEL
Supplier item number 088313
For wall, galvanised.
635 in stock, 1 day(s) - for expected shipment
Configure
Spring angle for spiral cable, shor
Item number: FJLEDVIN2
Supplier item number 088486
Stainless steel.
1300 in stock, 1 day(s) - for expected shipment
Configure
Clear plastic tube for DW 3,0 x 5,0 MM
Item number: DWSL05500
Supplier item number 088904
L = 500 mm. 3,0 x 5,0 MM
4846 in stock, 1 day(s) - for expected shipment
Configure
EHC positioning box, for 1" solid
Item number: POSBOXMA20
Supplier item number 080014
With 20 m cable to EHLDC. Positioning box with 20 meter cable for 1" solid shaft for EHLDC control
1 in stock, 1 day(s) - for expected shipment
Configure
EHC positioning box, for 1" solid
Item number: POSBOXMA10
Supplier item number 080012
With 10 m cable to EHLDC. Positioning box with 10 meter cable for 1" solid shaft for EHLDC control
Out of stock, 15 day(s) - for expected shipment
Configure


What do we offer?
As a dealer in the door industry, you can purchase all your spare parts in this online store. We provide a wide range of products, covering many different manufacturers and types, delivering to customers all over Europe. We want to be your preferred supplier of spare parts, and this is why we closely monitor the market on an ongoing basis, keeping up to date with new accessories, trend and spare parts, in close collaboration with our customers.
+ 45 62 62 25 79info@lindabdoorshop.com