L = 80 mm. Rails clips (connecting plate), 60 mm wide, 3 holes á 7 mm and 1 hole á 7 x 48 mm, 2 mm galvanized steel
L = 100 mm, type 10, galvanised. Rails clips (connecting plate), 60 mm wide, 3 holes á 7 mm and 1 hole á 7 x 48 mm, 2 mm Galvanized steel FF810S
For low lift version 2.3.
R = 380 mm, L = 1500 mm, T = 2 degr. 2" rail, vertical with arch and 250 mm extended leg, thickness 2 mm
For low lift, galvanised.
Standard, galvanised.
L = 120 mm. Rails clips (connecting plate), 60 mm wide, 3 holes á 7 mm and 1 hole á 7 x 48 mm, 2 mm galvanized steel
Type QP, L = 3000 mm.
Alignment pellet 1-2-3 mm, for equalizing uneven wall. 100 pcs. per tube.
L = 6000 mm, 90 x 65 mm, stainless.
L = 6000 mm, 90 x 65 mm, galvanised.
L = 6380 mm, 20 x 70 x 90 mm, QP.
.jpg?v=108877333)
Angle jamb, Type FF, 90 x 62 mm
L = 6000mm
L = 6000mm
90 x 62 mm, L = 6000 mm.
Galvanized, uesd for S/H/V FF
Galvanized, uesd for S/H/V FF
Galvanised
Used for low-lift FF
90 x 85 mm, L = 6500 mm.
The product has been replaced by: KAVIFF9K5442
Used for low-lift FF
90 x 85 mm, L = 6500 mm.
The product has been replaced by: KAVIFF9K5442
Assembly fitting for TF angle frame Galvanised steel
.jpg?v=108856470)
For facade door Anodised Aluminium
L = 6000 mm.
L = 6000 mm.
Bottom profile for Crawford 542 wtih genuie bottomrubber,L = 6300 mm, anodised aluminium.
40 x 40 x 2 mm, L = 6000 mm, alumin.
Used for bottom rubber with wide T-slot and with edge-cut handles see: TETBUF1037
44 x 7 mm, L = 6000 mm, raw alumini.
44 x 7 mm, L = 6000 mm, raw alumini.
Used for bottom rubber with wide T-slot and with edge-cut handles see: TETBUF1037
44 x 7 mm, raw aluminium.
44 x 7 mm, raw aluminium.
.jpg?v=108877139)
Fixed dimension, aluminium. Multi cassette for ET / LP 46 sections, inner width 46 mm, anodized aluminum
.jpg?v=108877137)
L = 7800 mm, aluminium. Multi cassette for ET / LP 46 sections, inner width 46 mm, anodized aluminum
.jpg?v=108877128)
H = 70 mm, fixed dimensions. Multi cassette for Crawford sections, inside width 42 mm, anodized aluminum, H = 70 mm