L = 3000 mm, 30 x 30 x 2 mm.
40 x 40 x 4 x 80 mm, galvanised.
38 x 38 x 3 x 35 mm, galvanised.
Galvanised steel To be installed on floor and welded to RHS
120 x 60 mm.
120 x 60 mm.
For RHS 60 x 40 mm, right. Tube connector bracket for low lift rails, right, type QP 3539, for square tube 60 x 40 mm
For RHS 60 x 40 mm, left. Tube connector bracket for low lift rails, left, type QP 3538, for square tube 60 x 40 mm
For RHS 100 x 100 mm, right. Tube connector bracket for low lift rails, right, type QP 3529, for square tube 100 x 100 mm
For RHS 100 x 100 mm, left. Tube connector bracket for low lift rails, left, type QP 3528, for square tube 100 x 100 mm
5 C Profile, squeezed at both ends and with fixings for bearing plates
L = 1000 mm.
L = 1000 mm.
5C Profile for horisontal tracks and as cross profile.
L = 6000 mm.
L = 6000 mm.
50 x 25 mm, L = 6000 mm.
Galvanised steel
Galvanised steel
20 x 53.5 , L = 6200 mm, incl. hole.
120 x 80 mm, galvanised. Used in pairs for console
80 x 80 mm, galvanised. Used in pairs for console
120 x 80 mm, for spring bracket. Galvanised steel
80 x 80 mm, for spring bracket. Galvanised steel
40 x 80 mm, for low lift fitting. Galvanised steel
Complete, with screws. Mounted on horizontal frame when rail for marantec is of model 11 length
.jpg?v=108857126)
Ff:1027n7b paro clamp plate. Pack of 100 pcs.
Incl. 2 pcs M8 X 70 bolt.
Mounting device for mounting 5C profile. 35 mm between the holes. Without bolts. To be used for strengthening of the bearing plate. Electro galvaniseret
.JPG?v=108856464)
L = 9000 mm, hot galvanised steel.
.JPG?v=108856452)
L = 6000 mm, Hot-dip galvanized
.jpg?v=108856429)
L = 7000 mm, hot galvanised steel.