Incl. bearing. Driving roller for BS60 door, including bearing and locking rings, the roller track is rounded with radius R9 mm, ground painted. For round irons
Incl. bearing. Roller for BS60 door including bearing and locking ring, "jaw" is inward angle, for angle rail
For Ø16 running rail shaft/round ir. Roller for BS60 door, including bearing and locking rings, the roller track is rounded with radius R9 mm, ground painted. For round iron / drive shaft
Machined shaft, Ø16, STÅ52 C/L-SLEB.
Left. Door stop with rubber bumper for Wormald BS60 door, galvanized steel angle
Right. Door stop with rubber bumper for Wormald BS60 door, galvanized steel angle
Type Braky-C. Eddy current brake, Bracky type C, adjustable brake based on permanent magnets, does not require power, is provided with free-run and therefore does not brake during opening
Supplied without socket.
Supplied without socket.
Left. Fuse protection trigger for BS60 door, left mounting, galvanized steel. Mounted between wire and fuse link
Right. Fuse protection trigger for BS60 door, right mounting, galvanized steel. Mounted between wire and fuse link
Type EM41Z. Pull switch for fuse protection on BS60 fire door, Schmersal type EM 41Z
Type XCK-M115. End stop for fire door, Telemcanique type XCK-M115
Telemecanique, incl. sign. Complete emergency stop with contact elements and sign, Telemecanique Harmony, type XALK178GTH26
8K2, 0,5W / metal foil. Power resistor. Used as a termination on devices that require monitoring. E.g., pressure-sensitive safety strips, smoke detectors, contacts, photocells.
1K2, 0.5W / metal film. Used for the DW circuit in the LD971 control system (GFA).
Used as termination on devices that require monitoring. For example, electric safety edges, smoke detectors, switches, photocells.
Used as termination on devices that require monitoring. For example, electric safety edges, smoke detectors, switches, photocells.
Power resistor. Used as a termination on devices that require monitoring. E.g., pressure-sensitive safety strips, smoke detectors, contacts, photocells.
.jpg?v=108856558)
4 x 14 mm, 0.5 m cable.
C-profile, L = 2500 mm.
24 VAC, for DIN rail. Gelbau resistance control, 24VAC, for DIN rail mounting, with screw terminals
Type CR10B-15. Photocell for BS60 fire door, type Conquest
Complete photocell system for fire door.
Suitable on Dalmatic BP2000. Interface module for electric sensor strips for use in safetyedge on doors, type Gelbau (Dalmatic), 6-pin connector suitable for Dalmatic PB2000 Fire door control. Fits 1K2 / 8K2 and diode termination
With P-profile. Terminal strip for BS60 door, black EPDM rubber profile. For electrical sensing list or DW
Type 838-2P. Anchor plate with telescopic base (spring flexible anchor), 25 mm spring travel
Steel. Anchor with mandrel (spinning top), wire is fastened with small screws in the side of the mandrel