.jpg?v=108856404)
6.3 x 25 mm, with drill point, 1250.
Screw for steel 6,5 x 25 mm. With countersunk head and TORX 30. Stainless steel. 500 pcs. per bag.
Screw for steel 6,5 x 25 mm. With countersunk head and TORX 30. Stainless steel
8.0 x 25 mm, with washer, electroplated Steel.
700 pcs per colli
700 pcs per colli
5.3 x 70 mm, TORX 25, Yellow chromium.
400 pcs per colli
400 pcs per colli
5.3 x 55 mm, TORX 25, Yellow chromium.
500 pcs per colli
500 pcs per colli
250 x 500 x 10 mm. Protects the rubber surface from unnecessary rapid wear from the rear loading edge of the truck
250 x 500 x 10 mm, without nut. Loose mounting plate for RB500 bumper. Supplied without M20 nut for attaching loose rubber bumper
250 x 300 x 10 mm, without nut. Loose mounting plate for RB300 bumper. Supplied without M20 nut for attaching loose rubber bumper
With 3 holes, 80 x 40 mm. Loose mounting plate for narrow bumper. Used for assembly of narrow bumper with 3 holes
70 x 390 x 80 mm, without mounting. Narrow bumper for leveler, 70 x 390 x 80 mm WxHxD. Mounting plate for rubber bumper block is purchased separately
250 x 500 x 100 mm. Rubber block for bumper RB500 for levelers, 250 x 500 x 100 mm (WxHxD). Two Ø 24 mm holes for mounting
250 x 300 x 100 mm. Rubber block for bumper RB300 for levelers, 250 x 300 x 100 mm (WxHxD). Two Ø 24 mm holes for mounting
Complete bumper for leveler, 250 x 500 x 100 mm.
Incl. 10 mm mounting plate and 10 mm protective plate for mounting on the front of the rubber block. Spare rubber block can be purchased separately
Incl. 10 mm mounting plate and 10 mm protective plate for mounting on the front of the rubber block. Spare rubber block can be purchased separately
* Discontinued - Sold as long as stocks last *
Complete bumper for leveler, 250 x 300 x 100 mm.
Incl. 10 mm mounting plate and 10 mm protective plate for mounting on the front of the rubber block. Spare rubber block can be purchased separately
Complete bumper for leveler, 250 x 300 x 100 mm.
Incl. 10 mm mounting plate and 10 mm protective plate for mounting on the front of the rubber block. Spare rubber block can be purchased separately
250 x 600 x 160 mm. Mobile bumper for levelers, 250 x 600 x 160mm. Complete with spring-mounted rubber bumper. The rubber bumper follows the truck up and down during loading / unloading
250 x 500 x 100 mm. Complete bumper for leveler. Incl. 10 mm mounting plate. Welded to the leveler. Spare rubber block can be purchased separately
250 x 300 x 100 mm. Complete bumper for leveler. Incl. 10 mm mounting plate. Welded to the leveler. Spare rubber block can be purchased separately
Type UDL2, Norwegian processor, 930. Main print for Loading Systems leveler controls. For 1-2-3 valves. Suitable for levelers with both hinged and sliding lip, for control boxes with 1, 2 and 4 buttons. Processor English: Lip is lifted slightly on return - retracted slightly, lifted to max
K4 relay PCB for UST1. Module Print for Loading Systems UST1 and UST1L Controls. Limit contacts
Elect. limit sw, 3x400 VAC, UST1KL. Loading Systems Control board type UST1 KL / 400VAC. Used on Loading Systems doors