.JPG?v=108878349)
.jpg?v=108881167)
With Ø40 mm roller. Bottom guide roller for Wormald BS60 door, roller is with external diameter Ø40mm, galvanized steel fittings
.jpg?v=108881161)
Ø130 mm in housing. Wheel in house for BS60 door type Wormald, galvanized steel, complete with cover plate and angle
with Ø40 mm roller. Bottom guide roller for BS60 door
From older LP doors. Driving roller for BS60 door, including bearing and locking rings, the roller track is rounded with radius R9 mm, ground painted. For round irons
Incl. bearing. Driving roller for BS60 door, including bearing and locking rings, the roller track is rounded with radius R9 mm, ground painted. For round irons
Incl. bearing. Roller for BS60 door including bearing and locking ring, "jaw" is inward angle, for angle rail
For Ø16 running rail shaft/round ir. Roller for BS60 door, including bearing and locking rings, the roller track is rounded with radius R9 mm, ground painted. For round iron / drive shaft
Machined shaft, Ø16, STÅ52 C/L-SLEB.
Type Braky-C. Eddy current brake, Bracky type C, adjustable brake based on permanent magnets, does not require power, is provided with free-run and therefore does not brake during opening
.jpg?v=112658269)
Bracket for pulley Dictator 3700, for Meverin firedoors.
Wall bracket for Dictator 3700, for Meverin firedoors.
Bracket for door for Dictator 3700, for Meverin firedoors.
Distance washer/horse shoe in 1 mm. Used as a blocking between wall and running rail on fire sliding door.
Toothed belt for Dictamat control
20 mm toothed belt for Dictamat control, made of PU and reinforced inside with steel wire.
Technical data:
Type: 20 mm toothed belt
Material: PU
Reinforcement: steel wire
Temperature resistant: -30 - + 80 Celsius
Resistant to: UV, Ozone and Oil
Strength: Toothed belt HTD 8m, width 20 mm = 2680 N
Toothed belt ordered costum made: port width x 2 + 2 meter
20 mm toothed belt for Dictamat control, made of PU and reinforced inside with steel wire.
Technical data:
Type: 20 mm toothed belt
Material: PU
Reinforcement: steel wire
Temperature resistant: -30 - + 80 Celsius
Resistant to: UV, Ozone and Oil
Strength: Toothed belt HTD 8m, width 20 mm = 2680 N
Toothed belt ordered costum made: port width x 2 + 2 meter
Type SD-1 og SD-2
.jpg?v=118671073)
Steel anchor TA M8 of electro zinc plated steel. For fixing e.g. systems and machines in non-reinforced concrete.
Steel anchor TA M6 of electro zinc plated steel. For fixing e.g. systems and machines in non-reinforced concrete.
Brake for fire sliding door type SD, VTK Kalipe.