Cable bolt set , for bottom bracket BSLBUQP3170.
Spring break safety device 5/4" AP. Left, H = 86 mm
Spring break safety device 1"- QP. Left, H = 86 mm
Spring break safety device 5/4" - QP. Right, H = 86 mm
Spring break safety device 1" - QP. Right, H = 86 mm
.jpg?v=112669503)
Anti-Lift, rail type L/LT 35 degr.. Complete, galvanized.
Fits on low-lift rails with a headroom of 200mm (door width less than 6 metres and area less than 25m^2). Fits on roof pitch 0-35 degrees. Always mounted on the right side seen from the inside.
Fits on low-lift rails with a headroom of 200mm (door width less than 6 metres and area less than 25m^2). Fits on roof pitch 0-35 degrees. Always mounted on the right side seen from the inside.
.jpg?v=113076329)
Shaft key, 1/4"x3/8"38 mm, straight
Cable break safety device, <= 450 kg, left, type QP
Cable break safety device, <= 450 kg, Right, type QP
Bush set for Ø140 mm excl. pulley
Stainless wire and end terminal
SPRING SHAFT COUPLING L = 100mm
This cable pulley is suitable for high and vertical lifting systems on a tube with internal cables, HSK/VSK standard. For doors of max. 6000 x 6000 mm and a max. weight of 500 kg, universal left or right.
Mounting bracket for HSK / VSK to increase the distance between the vertical angle and the triangle support plate (Item KONFJVHQP3390L / KONFJVHQP3390R), to make the cable break / knife of the cable break and the orange cap pass the triangular support plate.
Triangular plate to be used for the springs on tube for our Highlift and Vertical liftsystemswith cables inside. HSK/VSK . Left version.
Triangular plate to be used for the springs on tube for our Highlift and Vertical liftsystemswith cables inside. HSK/VSK . Left version.