Mounting box with DIN rail and 2 pcs. M16 cable glands.
Box dimensions LxWxH: 130x80x125mm
Used for example to mount a roadway detector on a DIN rail.
Box dimensions LxWxH: 130x80x125mm
Used for example to mount a roadway detector on a DIN rail.
.jpg?v=123849275)
Control unit LD971 without power cable.
Used for 1x230V, 3x230V & 3x400V.
Compatible with GFA control – model TS971
Used for 1x230V, 3x230V & 3x400V.
Compatible with GFA control – model TS971
Magnet for magnetic contact
.jpg?v=123968373)
Max. protection hight 2000 mm. Up to 10m in door width.
Supplied with power cable, 6-pole, length 5000mm.
Connection cable up to 10 meters, 4-pole, 3 pcs..
Additionally, various mounting screws, brackets, etc.
Supplied with power cable, 6-pole, length 5000mm.
Connection cable up to 10 meters, 4-pole, 3 pcs..
Additionally, various mounting screws, brackets, etc.
Marantec Multi-bit remote control including wall mount.
Should not be used with LD 971 control unit without an external receiver.
10 pcs per colli
Should not be used with LD 971 control unit without an external receiver.
10 pcs per colli
Marantec Multi-bit remote control including wall mount.
Should not be used with LD 971 control unit without an external receiver.
Should not be used with LD 971 control unit without an external receiver.
Control unit can be connected to 3x400V, 3x230V or 1x230V.
Supplied with short power cable for 3x400V.
Up - Stop - Down buttons in lid.
Supplied with short power cable for 3x400V.
Up - Stop - Down buttons in lid.
Contactor for Dalmatic BA2 control.
Fits all model years.
Auxiliary contacts should be replaced together with this.
Fits all model years.
Auxiliary contacts should be replaced together with this.
.jpg?v=124766688)
Auxiliary contacts for BA2 control.
Fits item number KONTAKTORBA2.
Fits item number KONTAKTORBA2.
LD971 control 1000mA, unit with integrated up-stop-down control for pulse or deadman operation.
Equipped with an integrated radio plug-in receiver (433MHz) and prepared for wireless safety edge protection (type: WSD).
1 x 230V CEE plugs, on a 0.7 meter cable included.
Compatible with GFA control – model TS971
Equipped with an integrated radio plug-in receiver (433MHz) and prepared for wireless safety edge protection (type: WSD).
1 x 230V CEE plugs, on a 0.7 meter cable included.
Compatible with GFA control – model TS971
Note! The set also includes a standard 3x400V supply cable.
LD971 control 1000mA, unit with integrated up-stop-down control for pulse or deadman operation.
Equipped with an integrated radio plug-in receiver (433MHz) and prepared for wireless safety edge protection (type: WSD).
3 x 230V CEE plugs, on a 0.7 meter cable included.
Compatible with GFA control – model TS971
Equipped with an integrated radio plug-in receiver (433MHz) and prepared for wireless safety edge protection (type: WSD).
3 x 230V CEE plugs, on a 0.7 meter cable included.
Compatible with GFA control – model TS971
Note! The set also includes a standard 3x400V supply cable.
LD971 control 1000mA, unit with integrated up-stop-down control for pulse or deadman operation.
Equipped with an integrated radio plug-in receiver (433MHz) and prepared for wireless safety edge protection (type: WSD).
3 x 400V CEE plugs, on a 0.7 meter cable included.
Compatible with GFA control – model TS971
Equipped with an integrated radio plug-in receiver (433MHz) and prepared for wireless safety edge protection (type: WSD).
3 x 400V CEE plugs, on a 0.7 meter cable included.
Compatible with GFA control – model TS971
Control unit LD971 and chain motor. 140 Nm, 21 RPM. IP65 and for 5/4" shaft.
Includes wedges for hollow and solid shaft, DW, spiral cable, 7 m motor cable, supply cable 3x400V, and motor bracket.
4 meters of chain included as standard
Includes wedges for hollow and solid shaft, DW, spiral cable, 7 m motor cable, supply cable 3x400V, and motor bracket.
4 meters of chain included as standard
Control unit LD971 and chain motor. 140 Nm, 21 RPM. IP65 and for 5/4"" shaft.
Includes wedges for hollow and solid shaft, DW, spiral cable, 7 m motor cable, supply cable 3x230V, and motor bracket.
4 meters of chain included as standard
Includes wedges for hollow and solid shaft, DW, spiral cable, 7 m motor cable, supply cable 3x230V, and motor bracket.
4 meters of chain included as standard
Control unit LD971 and chain motor with frequency inverter.
Control unit LD971 and chain motor with frequency inverter, 140 Nm, 100 RPM. IP65 and for 1" shaft.
GSM receiver module for up to max 1000 users, type: M200 (4G)
Fan for UPS in Dalmatic replacement air control (BA2)
Cable set for C60 UPS in Dalmatic replacement air control (BA2).
This ensures the fan runs continuously, which improves battery durability.
This ensures the fan runs continuously, which improves battery durability.
.jpg?v=124145127)
Cable set for C200 UPS in Dalmatic replacement air control (BA2).
This ensures the fan runs continuously, which improves battery durability.
This ensures the fan runs continuously, which improves battery durability.
Display with Up - Stop - Down buttons mounted on the front of the control unit.
The display is backward compatible with all Lindab Dalmatic BA2 control units.
The display is backward compatible with all Lindab Dalmatic BA2 control units.
Standard packaging – electric drive accessories for GFA
Clip for sun visor, for Marantec remote.
10 pcs per bag.
10 pcs per bag.
_(2)_(3).jpg?v=124285628)
Cable duct with lid
15 x 15 x 2000 mm, RAL9010, white
15 x 15 x 2000 mm, RAL9010, white
.jpg?v=124285630)
Cable duct with lid
20 x 35 x 2000 mm, RAL9010, white
20 x 35 x 2000 mm, RAL9010, white
Cable duct with lid
20 x 20 x 2000 mm, RAL9010, white
20 x 20 x 2000 mm, RAL9010, white
Slack cable switch for bottom hinge, Condoor.
Up to 450 kg.
This item replaces: KONTWISLBUQP5630
Up to 450 kg.
This item replaces: KONTWISLBUQP5630
GFA emergency chain operation, 4 m chain – SE
10 m cable set between motor and control unit for a Lindab BA2