NICE motor 100Nm, 24rpm, 1"
Item number: GEMOBK1N
Supplier item number 081050
NICE motor 100Nm, 24rpm, 1", BK1N IP54 with chain release. Motor can also be used with Lindab EHLDC control unit. Another motor cable is required.
(KABEHCNICE07, KABEHCNICE11, KABEHCNICE20)


84 in stock, 1 day(s) - for expected shipment
Configure
Telekabel PTS 1x2x0,6 mm
Item number: 9088118Q
Supplier item number 088118Q
Telecom cable, twisted pair, screen. PTS 1 x 2 x 0.6 mm. Roll of 100m.
Out of stock, 3 day(s) - for expected shipment
Configure
Radio receiver 868MHz Digital 993 (Bi-Linked)
Item number: EGMARADM993
Supplier item number 082396
Radio receiver. 868MHz Digital 993  Socket receiver for Bi-linked
6 in stock, 1 day(s) - for expected shipment
Configure
Multi RX receiver, 2 channel
Item number: 9088774
Supplier item number 088774
Multi RX receiver, 2-channel universal
Out of stock, 5 day(s) - for expected shipment
Configure
LP-Pro Basic PCB 3 x 230V and 1 x 230V
Item number: PRIPRO230
Supplier item number 081015
Basic PCB for LP-Pro control. Used for 3 x 230V supply and 1 x 230V supply, including frequency converter electric operation. Basic PCB is also used in HSI control.
4 in stock, 1 day(s) - for expected shipment
Configure
LP-Pro Basic PCB 3 x 400V
Item number: PRIPRO400
Supplier item number 081014
Basic PCB for LP-Pro control. Used for 3 x 400V supply
50 in stock, 1 day(s) - for expected shipment
Configure
Chain for NICE chain drive
Item number: KAEDENICE
Supplier item number 081075
Chain for NICE chain drive
974 in stock, 1 day(s) - for expected shipment
Configure
Chain assembler for NICE chain
Item number: KAEDENICES
Supplier item number 081076
Chain assembler for NICE chain
605 in stock, 1 day(s) - for expected shipment
Configure
Strong angle gear, K25 CB, 1:1 gear - complete
Item number: GEARVK25CBK
Supplier item number 088491
Strong angle gear incl. keys, K25 CB, 1:1 gear.
input- / output shaft Ø25x60

4 in stock, 1 day(s) - for expected shipment
Configure
Dataline noise filter, BA2 control
Item number: FERRITBA2
Supplier item number 080174
Dataline noise filter, BA2 control. For EMC protection of alarm signals.
24 in stock, 1 day(s) - for expected shipment
Configure
Warning lamp LED red 24V
Item number: LAMPE24LEDR
Supplier item number 082404
Warning lamp LED red 24V, 24VDC 2W LED IP65.
Red warning light for 24 VDC supply. Including LED light source, suspension and 7 meter cable. The lamp is assembled and ready for use.

5 in stock, 1 day(s) - for expected shipment
Configure
Warning lamp LED green 24V
Item number: LAMPE24LEDG
Supplier item number 082403
Warning lamp LED green 24V, 24VDC 2W LED IP65.
Green warning light for 24 VDC supply. Including LED light source, suspension and 7 meter cable. The lamp is assembled and ready for use.
8 in stock, 1 day(s) - for expected shipment
Configure
Warning lamp LED red/green 24V
Item number: LAMPE24LEDRG
Supplier item number 082405
Warning lamp LED red/green 24V, 24VDC 2+2W LED IP65.
Red/green warning light for 24 VDC supply. Including LED light source, suspension and 7 meter cable. The lamp is assembled and ready for use.

HxWxD 350 x 150 x 240 mm
27 in stock, 1 day(s) - for expected shipment
Configure
Chain guard, complete with assembly, for NICE motor
Item number: KAEDEUDVKIT4
Supplier item number 088754
Incl. keys and clamp ring. Chain cover ver. 4 with shaft for  motor mounting and bushing for 1" "door shaft. There is no space for pos.box on motor shaft. Extra shaft length can be ordered. Maximum door weight 250 kg.
5 in stock, 1 day(s) - for expected shipment
Configure
Junction box IP65 87x87x42mm
Item number: MONTKS87
Supplier item number 088175
Junction box, white. 87 x 87 x 42 mm, IP65.
84 in stock, 1 day(s) - for expected shipment
Configure
Slack cable switch, cable break safty device, left.
Item number: KONTWISLQP3178L
Supplier item number 25070
Slack cable switch, cable break safty device, left. Up to 450 kg.
69 in stock, 1 day(s) - for expected shipment
Configure
Slack cable switch, cable break safty device, right
Item number: KONTWISLQP3178R
Supplier item number 25075
Slack cable switch, cable break safty device, right. Up to 450 kg.
72 in stock, 1 day(s) - for expected shipment
Configure
EO PRO-LINE 24rpm/100Nm 7m cable, Power supply 3 x 400 V BK motor
Item number: ELDRQPBK7M3400
Supplier item number 089010
Electrical operation from PRO-LINE without power monitoring. Motor with chain, 100Nm and 24 RPM. 7 meter cable between motor and control. Power supply 3 x 400 V. Pro-Line Chain motor with 4mm chain.
2 in stock, 1 day(s) - for expected shipment
Configure
EO PRO-LINE 24rpm/100Nm 11m cable, Power supply 3 x 400 V BK motor
Item number: ELDRQPBK11M3400
Supplier item number 089011
Electrical operation from PRO-LINE without power monitoring. Motor with chain, 100Nm and 24 RPM. 11 meter cable between motor and control. Power supply 3 x 400 V. Pro-Line Chain motor with 4mm chain.
2 in stock, 1 day(s) - for expected shipment
Configure
EO PRO-LINE 24rpm/100Nm 7m cable, Power supply 3 x 230 V BK motor
Item number: ELDRQPBK7M3230
Supplier item number 089012
Electrical operation from PRO-LINE without power monitoring. Motor with chain, 100Nm and 24 RPM. 7 meter cable between motor and control. Power supply 3 x 230 V. Pro-Line Chain motor with 4mm chain.
2 in stock, 1 day(s) - for expected shipment
Configure
EO PRO-LINE 24rpm/100Nm 11m cable, Power supply 3 x 230 V BK motor
Item number: ELDRQPBK11M3230
Supplier item number 089013
Electrical operation from PRO-LINE without power monitoring. Motor with chain, 100Nm and 24 RPM. 11 meter cable between motor and control. Power supply 3 x 230 V. Pro-Line Chain motor with 4mm chain.
2 in stock, 1 day(s) - for expected shipment
Configure
EO PRO-LINE 24rpm/100Nm 7m cable, Power supply 3 x 400 V BF motor
Item number: ELDRQPBF7M3400
Supplier item number 089014
Electrical operation from PRO-LINE without power monitoring. Motor with release clutch, 100Nm and 24 RPM. 7 meter cable between motor and control. Power supply 3 x 400 V
8 in stock, 1 day(s) - for expected shipment
Configure
EO PRO-LINE 24rpm/100Nm 11m cable, Power supply 3 x 400 V BF motor
Item number: ELDRQPBF11M3400
Supplier item number 089015
Electrical operation from PRO-LINE without power monitoring. Motor with release clutch, 100Nm and 24 RPM. 11 meter cable between motor and control. Power supply 3 x 400 V
8 in stock, 1 day(s) - for expected shipment
Configure
EO PRO-LINE 24rpm/100Nm 7m cable, Power supply 3 x 230 V BF motor
Item number: ELDRQPBF7M3230
Supplier item number 089016
Electrical operation from PRO-LINE without power monitoring. Motor with release clutch, 100Nm and 24 RPM. 7 meter cable between motor and control. Power supply 3 x 230 V
3 in stock, 1 day(s) - for expected shipment
Configure
EO PRO-LINE 24rpm/100Nm 11m cable, Power supply 3 x 230 V BF motor
Item number: ELDRQPBF11M3230
Supplier item number 089017
Electrical operation from PRO-LINE without power monitoring. Motor with release clutch, 100Nm and 24 RPM. 11 meter cable between motor and control. Power supply 3 x 230 V
3 in stock, 1 day(s) - for expected shipment
Configure
LCC V3 print BA2
Item number: PRILCCV3
Supplier item number 080167
LCC V3 print, til BA2 portstyring.
2 in stock, 1 day(s) - for expected shipment
Configure
DW40 in mounting box - complete
Item number: DWPRO-2K
Supplier item number 089237
DW40 in mounting box - complete.
Contains
1 pcs membrane box
1 pcs hose
5 pcs coupling sleeves
4 pcs  zip ties
1 pcs DW (excl. print)

Note. This is not for an LP-PRO.
DW for an LP-PRO: Search for item number DWPRO

Replace DWLDB01 / 082139

ATTENTION! As this is a universal assembly kit, instructions are not included.

Reference is made instead to the original instructions for door control.
84 in stock, 1 day(s) - for expected shipment
Configure
DW40 on print in box
Item number: DWPRO
Supplier item number 081046
DW40 on print in box.
Used for LP Pro controls.
163 in stock, 1 day(s) - for expected shipment
Configure
LP-Pro pcb for force monitoring
Item number: PRIKRAFTPRO
Supplier item number 081021
Force monitoring pcb for mounting in the LP-Pro control. Works together with NICE motors from Lindab.
76 in stock, 1 day(s) - for expected shipment
Configure
Encoder for LP Pro, magnetic
Item number: ENCODERLPPRO
Supplier item number 081081
Magnetic absolute encoder for all NICE motors used with the LP-Pro controller. Does not fit the HSI motors.
6 in stock, 1 day(s) - for expected shipment
Configure


What do we offer?
As a dealer in the door industry, you can purchase all your spare parts in this online store. We provide a wide range of products, covering many different manufacturers and types, delivering to customers all over Europe. We want to be your preferred supplier of spare parts, and this is why we closely monitor the market on an ongoing basis, keeping up to date with new accessories, trend and spare parts, in close collaboration with our customers.
+ 45 62 62 25 79info@lindabdoorshop.com