Special key for BECKER motors without brake. Set with wedge for solid and hollow shaft. Ordinary wedges MUST NOT BE USED !!
Special key for Becker gear motor with brake. The key is for solid shaft.
Fits all EHLDC chain motors. Fits all EHLDC chain motors
.jpg?v=108876793)
.jpg?v=120373499)
Discontinued - sold as long as stocks last
Type BK2C, 70 Nm, 16 rpm. A70LI/16LK, without limit switch. For Lindab EHLDC controls
Type BK2C, 70 Nm, 16 rpm. A70LI/16LK, without limit switch. For Lindab EHLDC controls
For Becker motor. Cable srew connection that fits the end stop housing on all Becker motors
For Lindab car wash control unit. Fits both EHLDB and EHLDC carwash controls
Complete with emergency stop and PC.
EHC car wash control unit. Also fits the latest EHLDB carwash controls
For EHC car wash control unit.
Complete with emergency stop and PC.
1 x 230 V for Schneider inverter. From serienr. EHC90276/I nr. 120231
Compatible up to series number EHC9.
Complete. Incl. Body and NC-Element
For fitting behind emergency stop.
.jpg?v=108877070)
Power supply cable with 3 x 400 volt CEE plug and connector for EHLDC control. L = 2,5 meter
Power supply cable with 3 x 400 volt CEE plug and connector for EHLDC control. L = 1,3 meter
.jpg?v=109197705)
Power supply cable with 3 x 230 volt CEE plug and connector for EHLDC control. L = 2,5 meter
Power supply cable with 3 x 230 volt CEE plug and connector for EHLDC control. L = 1,3 meter
L = 20 m. Cable with connectors on both ends
Power supply cable with connector for EHLDC control. L = 10 meter
Without CEE plug.
Without CEE plug.
Extension bracket cable break safet. Extension brackets for motor brackets and wire break safety device. For Q-part rail sets 152 mm
For motor fitting and cable break d. Extension brackets for motor brackets and wire break safety device. For Q-part rail sets 111 mm and 127 mm
With 7 m cable. Hercules 2 radar can distinguish between vehicles and people. It has 2 outputs - set to No or NC. Adjustable filters for eg intersecting traffic, slow traffic, field size, etc. Can be adjusted according to the conditions at the installation site. Mounting height between 2 and 7 meters. Remote control RegloBeam 2 can be used. Supply voltage 12-28 VAC / 12-36 VDC, 75mA
.jpg?v=109424602)
.jpg?v=109424599)